Abrazadera de soldadura vertical Práctica popular Manija de liberación rápida Abrazadera de palanca vertical GH-12050-U

A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 8 x 9mmLength 140mm

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron

Providing adjustable power for the specific task at hand this Einhell EINTEDS20E features electronic speed control and a soft start function which gives that much desired smooth start when used.Particularly designed for those hard-to-reach places and for tireless machining of offset this delta sander comes complete with a cable clip for securing the wind-up cable. Generating minimal vibration this delta sander also has an ergonomic design and soft grip.Providing clean and low dust operation this tool includes an adapter for connection to a dust extraction system. So the abrasive paper can be changed within seconds this Einhell EINTEDS20E also features extreme fix velcro fastening which sits crease-free on the sanding disk.

Bahco S138 1/4in, 3/8in, and 1/2in drive 138 piece metric and imperial socket set that consists of: 12 x 1/4in Hexagon Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 10 x 1/4in Hexagon Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 1 x 1/4in Reversible Ratchet 60 Teeth and Two Component Handle 150mm. 1 x 1/4in Spinner Handle with Two Component Handle 150mm. 1 x 1/4in Sliding T-bar 106mm, 1 x 1/4in Extension Bar 50mm, 1 x 1/4in Extension Bar 100mm, 1 x 1/4in Universal Joint, 1 x 1/4in Bit Holder, and 1 x 1/4in Flexible Extension Bar 150mm. 16 x 3/8in Hexagon Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, and 22mm. 1 x 3/8in Reversible Ratchet 60 Teeth and Two Component Handle 200mm. 1 x 3/8in Spark Plug Socket 21mm (13/16in), 1 x 3/8in Spark Plug Socket 18mm, 1 x 3/8in Spark Plug Socket 16mm (5/8in), 1 x 3/8in Universal Joint, 1 x 3/8in Extension Bar 75mm, and 1 x 3/8in Extension Bar 150mm. 18 x 1/2in Hexagon Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 32, and 34mm. 9 x 1/2in Hexagon Sockets: 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8, and 1.3/16in. 1 x 1/2in Reversible Ratchet With 60 Teeth and Two Component Handle 250mm, 1 x 1/2in Sliding T-bar With Double Function, 1/2in Head 3/8F-1/2in Male Adaptor, 1 x 1/2in Extension Bar 125mm, 1 x 1/2in Extension Bar 250mm, and 1 x 1/2in Universal joint. 1 x Bits Adaptor: 1/4in Square Drive. 4 x Pozidriv Bits: PZ 0, 1, 2, and 3. 5 x Phillips Bits: PH 0, 1, 2, 3, and 4. 3 x Flat Bits: 4, 5.5, and 7mm. 6 x Insert Bits: 3, 4, 5, 6, 8, and 10mm. 9 x Torx Bits: T 8, 10, 15, 20, 25, 27, 30, 40, and 45. 1 x Bits Ratchet, 3 x Hexagon Keys: 1.5, 2, and 2.5mm. 8 x Crow Foot Wrenches: 10, 11, 13, 14, 15, 17, 18, and19mm 13 x Combination Spanners: 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, and 19mm. Supplied in a High Density Polythene Case.

50 piezas de disco de tierras raras de 9x3 mm N40 grado imán fuerte de neodimio artesanía magnética de hierro

These Knipex 35 32 Series precision electronics round nose pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Length: 115mm.Pointed Round Jaws for bending wire eyes.