Libre
Soutien
Mercedes-Benz is known for improving the already positive driving characteristics of the E-Class S211 (T-model) with an optional air suspension system. Our Aerosus rear left air spring is a spare part for this air suspension. It fits into all S211 E-Class models without ADS built between 2002 and 2009. The air spring is delivered with an integrated solenoid valve. In addition, it has a specially crafted rolling piston and clamping rings, which are attached to the air spring so that they don't "seize" and thus can't trigger a leak. The spare part can be fitted immediately. Presence of ADS The offered Aerosus air spring is designed for vehicles with level control, but with ADS. Before buying online, check if your E-Class has ADS (Adaptive Damping System). You can determine this as follows: If you have a selector switch for the Comfort and Sport modes of the air suspension in the cockpit of your vehicle, then the ADS system is present. Another distinguishing feature is the PINs of the electrical connection. ADS vehicles have three PINs on the connection, while vehicles without ADS have two PINs. A Defective Level Control Means Less Safety If there is an air spring leaking, then the vehicle will lower on the rear axle overnight. This usually happens when the air spring, which is mostly made of rubber, wears out after years of operation and becomes porous. Hence, the level control can no longer hold or change the vehicle's level position due to escaping compressed air. The vehicle lowers on one side at the back, stays crooked and the overall balance is lost. The compressor runs for too long as it tries to provide the required air pressure for the air suspension. That causes it to overheat. If you don't change a defective air spring quickly, then you should expect considerable follow-up costs. Wear Leaves Traces Air springs are wearing parts. As a rule, age and use leave their mark on both sides of the axis simultaneously. You therefore always have to change both air springs of an axle together. This causes higher costs, but unfortunately can't be prevented. In order to accommodate you financially, we offer 10% discount on pair purchase. Do not take a defective air suspension lightly. By doing so, you endanger the driving stability and lose the comfortable braking and handling. With uneven load distribution or difficult road conditions with many curves, a functioning level control is absolutely necessary. Quality Inspection Our spare parts, and in particular our air springs, are made of OEM-specified materials and stand out due to their matching accuracy, quality and longevity. We ensure this through expert controls in Germany. Stress tests and material tests are constantly carried out. We trust our Aerosus air springs and therefore give you 2 years limited warranty on our product. If you aren't satisfied with the air spring for your T-model E-Class S211, simply take advantage of the 30-day money-back guarantee. In any case, you must act quickly and exchange defective air springs. Online purchase is easy and quick. You have your spare part in a short time and can install the new air springs quickly. Our Aerosus rear left air spring for the Mercedes-Benz E-Class S211 without ADS has an important role in your air suspension and thus ensures the excellent driving and braking characteristics of your vehicle with maximum comfort.
Dieser AEROSUS Ventilblock in Erstausrüsterqualität für das Luftfederungssystem von A7 C7 4G Avant, ersetzt den Original-Ventilblock. Die Qualität, Sicherheit, Genauigkeit und Lebensdauer dieser Ventileinheit gleicht dem Original-Teil.
Aspire brings you yet another great new mod and tank kit. Introducing the even more powerful, more up to date, Skystar Revvo kit (TPD Edition). It's a dual 18650, 210 watt mod with a 1.3 inch touch screen and the revolutionary Revvo tank. Aspire has broken the mold for a tank of this type and brings you an all new concept in coils, the flat Radial coil. A coil for great vapor production and excellent flavor. The tank itself comes in a TPD compliant 2ml version. It has adjustable top airflow and is top fill, it is simplicity itself to fill, change coils and even replace the glass. Revvo clearomizer features: -- New ARC(Aspire Radial Coil) technology -- Spring loaded filling tube for top refilling -- Adjustable top airflow by way of 3 airflow slots -- Come with a protective silicone cap -- 510 threading connection -- 24mm overall diameter SkyStar mod features: -- 1.3inch OLED touch screen -- Houses dual 18650 batteries (sold separately) -- Temperature control at100-315'C/ 200-600'F -- Voltage Range: 0.5-9.0V -- Coil Resistance: 0.1-0.5ohm -- Output Modes:VW/ VV/ BYPASS/ TC/ CPS -- Multiple protection: Automatic cutoff Over discharge/charge protection Over heat protection Battery reverse protection -- Continuous fire time is adjustbale from 5 to 15 seconds -- The Skystar can be charged via the Micro-USB port. When charging the screen will display 2 flashing battery icons, voltage level, charge current as well as charge time. The charging port can also be used to update the firmware. -- 510 threading connection Brand: Aspire Wattage Range 5-210W Tank Capacity 2ml Diameter 24mm Size 132 x 50 x 33mm
Wenn Sie wieder einmal mit dem Auto unterwegs sind und ein Starthilfekabel im Kofferraum haben, brauchen Sie keine Bedenken zu haben irgendwo stecken zu bleiben. Das Einhell Starthilfekabel BT-BO ist je nach Ihrer individuellen Auswahl für Benzin- oder Benzin- und Dieselmotoren geeignet. Sie können es zur Starthilfe mit einem anderen Auto verknüpfen und so Ihre Batterie im Handumdrehen wieder starten. Technische Daten: Einhell Starthilfekabel BT-BO 16A 4 vollisolierte Pol-Zangen nach DIN (12-24 V)Leitermaterial aus kupferbeschichtetem Aluminiumkernfür Benzinmotoren bis max. 2.500 ccmQuerschnitt: 25 mm² (= 16 mm² Kupferkabel)Prüfstrom: 220 AKabellänge: 2 x 3 minkl. TragetascheGewicht ca.: 1,34 kg Einhell Starthilfekabel BT-BO 25A 4 vollisolierte Pol-Zangen nach DIN (12-24 V)Leitermaterial aus kupferbeschichtetem Aluminiumkernfür Benzinmotoren bis max. 5.500 ccmfür Dieselmotoren bis max. 3.000 ccmQuerschnitt: 40 mm² (= 25 mm² Kupferkabel)Prüfstrom: 350 AKabellänge: 2 x 3,5 minkl. TragetascheGewicht ca.: 2,4 kg
Optimales Gewindesicherungsprodukt. Einsetzbar bei geölten Oberflächen sowie galvanisierten Schrauben. großer Temperatureinsatzbereich verhindert Leckagen einsetzbar beigeölten Oberflächen schnell aushärtend beständig gegen Belastungen und Vibrationen kontrolliertes Moment-/Spannungsverhältnis10 g
OptiMateTM lithium 0.8A, the OptiMate maintenance device for the most effective protection of your LiFePO4 battery. The new OptiMate lithium 0.8A protects your investment and ensures that your Lithium Iron Phosphate Battery (LiFePO4 / LFP) will deliver the promised benefits for a long time. The unique LiFePO4-specific program of the OptiMate lithium 0.8A ensures efficient and safe charging and balancing of the cells in the battery. The maintenance program of the OptiMate lithium 0.8A supplies power to the circuit of the vehicle, protects the battery and keeps the charge at 100%. Features
Recommended for LiFePO4 / LFP batteries up to 50Ah Program control LiFePO4 microprocessor AC power supply 100-240V 50-60Hz, 0.23A at 100V - 0.15A at 240V Drain back current below 0.001A Output current (basic charge) 0.8A Charging time limit 48 hours (maintenance time: unlimited) Maintenance / test cycles 30 min / 30 min (changing hourly) Load holding test range: 10.1 - 13.2V. OK (green) = battery voltage> 13.2V Size 167 x 65 x 46 mm Weight 0.4 kg (0.6 kg) Housing classification fully encapsulated (IP54), 4 wall mounting brackets input cable length 2m Output cable length 2m Supplied accessories O-01 weather-resistant permanent connection cable O-04 Crocodile / battery terminals Operating temperature range -20 ° C / + 40 ° C Power consumption (no battery connected) 0.0089kWh / day Ratings / Approvals Safety, EMC, energy efficiency, enclosure protection class
