Mango Hexagonal de acero inoxidable Desbarbado Herramienta de achaflanado externo Máquina de biselado Quitar rebabas Reparaciones Herramientas

The Arctic Crack-It Shock Freeze Release Spray releases seized and corroded parts through shock freezing. The freeze action breaks the corrosion seal and allows the penetrant to reach the corroded area, releasing the seized items in 1-2 minutes. Also helps to prevent future corrosion and is completely bio-degradable. Lowest Operational Temperature: -45°C.

These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

50 piezas de disco de tierras raras de 9x3 mm N40 grado imán fuerte de neodimio artesanía magnética de hierro

Folding truck/hand cart with sturdy rubber transport wheels, a pull-out handle and an aluminium / steel frame with a folding aluminium blade. Load capacity: 100Kg. Size (folded): 700 x 480 x 65 mm. Size (open): 985 x 480 x 420 mm. Weight: 4.4 kg.

The ALM Manufacturing Chainsaw Chain Oil contains a unique formula of modern extreme pressure additives that provide superb lubrication, reduced chain and bar wear and improved fuel economy. Blended and bottled in the UK. Size: 1 litre.