Bahco Combination Spanner 13mm SBS20-13

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.99 x 35mm Box 1000

Grußkartenset Deluxe "Kristallzauber" Inhalt: 10 Doppel-Grußkarten, ca. 16 x 16 cm, perlmutt-schimmernd, 5 Farben 10 Folienaufleger mit edler Glimmerveredelung, ausgestanzt 10 Kartenaufleger mit Prägung, ausgestanzt, 5 Farben 10 passende weiße Umschläge Deluxe-Grußkarten sind traumhaft schöne, hoch veredelte Grußkarten vom Allerfeinsten. Deluxe-Grußkarten sind geschmackvoll und äußerst originel...

The Bosch BT150 Tripod is absolutely secure stance on any floor. Suitable for GPL 5 c; GCL 25; GPL 3 ; GLL 2-15; GLL 3-80 P; GLL 2-80 P; GLL 2-50; GLL 3-50; GLM 50; GLM 80; GLM 150; GLM 250 VF; GIM 60 L Professional Features: Robust aluminium design For work heights from 55 to 157 cm Functionality and precision due to circular vial 1/4" tripod thread Optimised working with line and point laser Good transportability due to low weight

Rem?des fut?s au bicarbonate 60 rem?des fut?s et pratiques ? base de bicarbonate pour soigner les petits bobos du quotidien et prendre soin de soi. Des astuces sant? et beaut? efficaces ? peu de frais, ?cologiques, inspir?es des trucs et astuces de...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.12.7mm.Key Type. 6mm hexagonal wrench

50 kleine Organza-Schleifen, Band ca. 7 mm breit, insgesamt ca. 3 cm, schoko.