Grex G6.2 K-Sport, integral helmet

Description: 1. A pair of universal replacement 12V shell horns.  With universal mounting brackets, installation is simple. No additional work is required.  Can be used as direct replacement to the snail shell design or round horns.2. Some cars may have a plug fitted to the horn which you need to replace with 2 spade terminals, but in most cases these horns will fit on to your car with nothing else required.Specification:12V Dual Tone Snail Air Horn (1 Pair)110DB Rating: LOW 410HZ HIGH 510HZDimension of single horn (approximate): Diameter:8.5 cm Depth: 7.5 cmFitting instructions includedEasy to installTo be used only for 2 terminals versionSuitable for cars, van, bikes and boats with 12V power supply  Package Included: 2 X 12V Air Horn

Protection
certified under norm EN 13594:2015 "protected glove for motorcyclists" Aramide protection on back of hand hard plastic knuckle protection knuckle protection tested (impact test for knuckle protection) ball of thumb reinforced with SuperFabric®-brand material
Fit/features
visor wiper special flat seam elasticated leather panels on back, thumb & fingers velcro adjustment at wrists & cuffs
Lining
unlined
Outer shell
highly abrasion-resistant kangaroo leather palm goat skin upper colourfast & sweat-proof

The perfect gloves for the everyday urban commuting. Maximized ventilation for the warmer days and certified safety combined with the unique Dainese style. Ride your own way on the streets of the city. Features
Dainese Smart Touch on the index finger Reflective inserts Soft inserts on the knuckles
Ergonomics
Adjustable cuff strap Neoprene cuff Pre-curved fingers
Materials
Amica suede palm Breathable and elasticated fabric
Temperature
Perforated mesh fabric on the fingers and the back of the hand
Performance
Gloves certified to Cat. II - Pr- EN 13594 Standard lev. 1 Reinforced palm

26inch 136W LED Work Light Bar Combo Spot Flood Offroad SUV ATVSpecification:Model Number: DY93G-136WProduct Name:LED Work Light BarType: LED Work LightLight Color: WhitePower: 136WDimensions: 26inchWorking Voltage: DC 10~32V (fit 12V/24V vehicles)Color Temperature: 6000K-6500KWaterproof Rate: IP67LED Quantity: 136pcsWorking Temperature: -40~60 degree CelsiusLife Span:About 50000 HoursMaterial: Aluminium Die cast HousingLens material: PC LensMounting Bracket:Aluminum bracketWire Connection: Black wire- negative, Red wire- positive.Features:1.Super Bright: Ultra Bright LED chips to enable longer illumination range and better visibility. Help to reduce traffic accidents caused by bad weather or bad road conditions. Ensure the safety of the driver2.High Performance: IP67 Waterproof Rate, dustproof, rustproof, shockproof and durable make it possible to withstand any harsh environments.3.Heat Dissipation: Special die-cast aluminum and efficient cooling system provide excellent heat dissipation effect.4.Adjustable Mounting Bracket: Comes with adjustable mounting bracket for offering convenience to adjust position flexibly.5.Where to Mount:You can mountlight bars on the front bumper, bull bar, lower bumper opening, front the grill, hood, roof rack and rear step bumper of your cars.Package includes:1x LED Work Light Bar1x Necessary mounting kitsApplication:Perfect as reversing lights, fog lights, daytime running lights and off road work lamps.Apply to: Off-Road, Pickup, Wagon, UTV, C

Description:1.Using high quality PBT plastic material, durable.2.Cans black matte body after treatment, the surface is very delicate.3.The unique detachable design, removable ashtray and debris into the tank.4.Precision anti-smoke leaking gasket design, air tightness, butts off so quickly, while effectively prevent accidental tipping ashtray.Specification:Material: Steel + plasticApplicable models: for BMW of 1 series 3 series 5 Series 7 X 1 X 3 X 5 X 6Product size:7.5x9 cmPackage Included:1 x Car Ashtray

LS2 FF327 Challenger
UV-resistant layer security certification 3 bowls made of HPFV
Shell sizes
LS2 offers multiple case sizes, custom-sized EPS protective films and our high-performance, high-quality comfort filler as well as 3D laser-cut plastic foam for a perfect fit and comfort throughout the day.
It is made from HPFC
The high performance fiberglass composite material consists of carefully layered layers of a unique resin preimpregnated fiberglass fabric to form a tough, ultra-light and inflexible casing or shell that disperses impacts in a safer manner.
Cooling system
LS2 helmets have a so-called "Dynamic Flow-through Ventilation". Multiple adjustable inlet ducts and EPS damping with air ducts in conjunction with the rear spoiler and exhaust ducts provide permanent ventilation to provide the driver with cool and comfortable conditions.
Metallic security badge
This small metallic triangle is an exclusive LS2 feature, which additionally strengthens the connection of the helmet band with the helmet.
Quick release
The metal buckle combines with a high-quality chin strap with a plastic tongue with teeth. When closing you hear a soft "click". As far as locking until you reach a comfortable but tight seat. Pull the ribbon to unlock the tongue. Further adjustment options are provided by the chinstrap on the side of the metal buckle.
Emergency release system
Our emergency release system allows the emergency service to remove the helmet pads and thus create an additional space for helmet removal with minimal movement of the injured person s head and neck. It is recommended that someone holds the helmet to avoid movement when removing the padding. Slide your finger into the red ribbon and gently pull on it to remove the pads. Slide the side pads over the straps and remove them from the helmet.
Visor
LS2 visors are made from 3D optically correct "A-class" polymers, a space exploration polymer with high resistance to impact energy and maximum visibility. Our visors are stable, scratch-resistant and UV-resistant. All this combined with the ultimate PINLOCK technology provides the most advanced anti-fog standard.
Quick disassembly system
This system (patent pending) simplifies the change of the visor with the bare hands. The spring detent built-in with detent pin secures a perfect fit without air gaps when the visor is closed.
Comfort lining
All LS2 helmets have removable and washable inner lining to keep them fresh and new. Our anatomically designed cheek pads are based on LS2 s 3D laser technology for a perfect fit. We use hypoallergenic substances, which carry away the moisture, in order to ensure the driver always pleasant conditions.
Chinguard
A high-quality fabric placed in front of the chin reduces the airflow in the driver s face and makes it easier to drive. The chin guard is removable when hot.
Hypoallergenic
We use hypoallergenic substances that support the moisture transport and ensure a comfortable fit.
Laser cut upholstery
Foam with different densities is laser cut in 3D and adapts perfectly to the driver s head shape.