SP Connect Moto Bundle iPhone 8+/7+/6s+/6+, Smartphone holder

12V Fuse Holder Circuit Box Blade Standard Motorcycle Car ACU Without FusesDescription:Allows easy installation of additional circuits without cutting, splicing or soldering.Turns one fuse slot into two therefore providing individual protection for each circuit.Easy installation.Specification:100% brand new!!!Colour: BlackWhole Length: about 15.8cmVoltage: 12V DCMax . current: 20AHelp you to add a fuse for installing additional accessories without splicing or soldering.Application:With the ever increasing amount of vehicles manufactured with the CAN BUS wiring system it is becoming increasingly difficult to locate a quick power source without cutting,splicing and soldering.This little component overcomes this issue and has the added advantage of a built in fuse holder.Therefore is ideal for installing additional accessories,such as phone kits, alarms, central locking kits, games consoles, hard wired sat navs, accessory sockets, auxiliary lights, driving recorders, trackers etc.Note:1. Please check the size measurement chart carefully before making payment.2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.4. Instruction is not included.5. Fuse is not included.Package included:1 x Fuse Holder (Fuses are not included.)

The Hoodie Denim Booster is a casual hoodie with Kevlar protection for use in the engine. The hoodie comes with Kevlar panels and removable protectors on shoulders and elbows. In addition, the hoodie s hood can be removed provided with several stab and breast pockets and inner lining made in mesh.
Other characteristics:
Casual hoodie with Kevlar protection for use in the engine. Kevlar panels on shoulders and elbows. Detachable hood. Double closure with zipper and buttons. Two side pockets and one inside, all with zipper closure. Two breast pockets, two buttoned lockable Equipped with removable protection on shoulders and elbows. Mesh lining on the inside.

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Nostalgischer MotorradstiefelRahmengenäht Rutschfeste Profilsohle Wasserabweis. Rindleder Abriebfeste Schaltverstärkung Echt Leder Sehr hochwertiger Klassik-Stiefel Kalbs-Lederfutter Reißverschluss hinten Rutschfeste Gummiprofilsohle, durchgenäht; öl-, säure- und benzinfest 30 cm hoch Größe 40 - 47

Acerbis X-Team StiefelExtrem leichteSchutzstiefel Schnitt- und abriebfestes Obermaterial Fersenschutz aus elastomerem Material für verbesserten Komfort und Stoßdämpfung Differenzierte Struktur TPU Einsätze im Bereich der Tibia, Knöchel und Gangwechsel für maximalen Schutz 4-Haken-Verschluss mit Schnallen für Feineinstellung und Klettverschluss am Gamaschen Hitzeschutz in Wildleder Gamasche und Schienbeinfalten im weichen Schnitt und abriebfeste Mikrofaser Hochabriebfeste Dual-Density-Gummisohle Innenausstattung aus 3D-Mesh für verbesserten Komfort und Schweißabsorption EN 13634: 2015 - übertrifft die 3 Homologationsstufen (LEVEL 2)

Description:1. Do not fade. No deformation.2. Easy installation. Self-adhesive, tape is at the back.Usage: Rear Fog Light Cover Trim.Placement: Rear, Left, Right.Fitment: For Honda CRV CR-V 2012-2014.Specification:MaterialABS PlasticColorChromeSize345X100mmInstallation:1. Please clean the area and eliminates the substance before mounting this product.2. Check the installation area first and then release the back of tape paper.3. Products are equipped on the vehicle with exactly and use a clean cloth to press evenly is attached.4. Products within 48 hours after installed, please avoid washing your car and touching the water.Package Included:2 X Fog Light Cover