The Faithfull traditional lead dresser manufactured from straight grain seasoned Beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials. Weight: 375g.Face Dimensions: 50 x 170mm (2 x 6.3/4 in).
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
Stahlwille Series 49 INHEX Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Overall length: 52mm.Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive. Size: 3mm.
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 22mm
The Wera BiTorsion Extra Hard (BTH) bits significantly extend service life. Ideal for use with screws into general construction materials and timbers. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life. Use with all combi and drill drivers. For impact tools, use Impaktor bits.Card of 2 Wera 855/1 BTH BiTorsion Pozidriv PZ2 Insert Bit Extra Hard 25mm
The Faithfull FAIOCP50205L has an efficient lever action pump for use with steel barrels. This heavy-duty pump features a diecast aluminium head and bung nut, with a zinc plated 38mm curved discharge spout and telescopic suction tube that adjusts to suit the barrel size. The Faithfull FAIOCP50205L is for use with petroleum based liquids only with the following specifications: Delivers: 300ml (10 fl oz) per stroke. Fits: 50 to 205 Litre (15 - 55 gal) drums.
