Silhouette:Fourreau / Colonne; Ourlet / Traine:Longueur Sol; Détails au Dos:Fermeture; Décoration:Ceinture / Ruban; Tissu:Pailleté,Mousseline de soie; Manches Bretelles:Manches Longues; Conseils:Les couleurs peuvent varier légèrement en raison des différents paramètres du moniteur,Lavage à la main uniquement; Style:Elégant; Décolleté:Bijoux; date d'inscription:12/20/2020; Buste:; Les hanches:; Creux au sol:; TOUR DE TAILLE:; Emballage:Non
The Union 3G114 C-Series BS 5 Lever Mortice Deadlocks are suitable for use on timber doors hinged on the left or right with the keys being suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side. It has force resistant, anti drill, anti-pick and anti-saw security features and is available with square forend and striking plate with a 20mm bolt throw. The 3G114 mortice deadlocks are supplied with one plain escutcheon and one escutcheon with a cover plate, finished to match the faceplate/strike. The 3G114 series locks are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. Case: Silver powder coatBox Strike Assembly: Painted to match forendDeadbolt: Brass, with hardened steel rollersKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722Cut Key Number: B-5LCNB Not suitable for master keyingRebate Kit: B-3G114R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doors A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Visi packed.Forend Finish: BrassCase Size: 80mm x 77mm (3 in)Backset: 53mm This is the measurement from the edge of the door to the centre of the keyhole.
The Forge range of Modular Handles incorporates a modern backplate style with a straight bar handle. The sprung handles have a lasting finish and are ideal for internal or external use. They have been tested for corrosion resistance and cycle tested beyond 100,000 uses. Backplate Size: 184 x 40mm. Supplied with screws and fitting instructions. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch, a privacy lock is built into the handle for use in WC's or Bathrooms where no mortice lock is fitted. The exterior handle has a lock over-ride which can be opened with a coin or screwdriver.Brass finish.
