Stanley FatMax Screwdriver Insulated Parallel 2.5mm x 50mm

The Faithfull traditional lead dresser manufactured from straight grain seasoned Beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials. Weight: 375g.Face Dimensions: 50 x 170mm (2 x 6.3/4 in).

Aluminium Rivets - Available in Short Medium and Long Lengths.Pack of 15Size: 5mm Short

This Facom 4 piece plier set comprises the following: Locking multi-grip pliers (181A.25CPE).Diagonal cutters (192.16CPE).Half-round nose pliers (185.20CPE).Combination pliers (187.18CPE).

Bahco ProfCut Toolbox Hardpoint Saw for medium thick materials such as timber, plywood, fibre and chipboard. Slim blade and nose for easy access. 3-side ground, super sharp GT-toothing for high cutting speed. Has a two-component handle that provides optimum user comfort. Blade Length: 380mm (15in).Teeth: 11 tpi.

Number of drilling modes: Three. Hammer drill, rotary drill, hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. The HR3210C features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration Forward/reverse rotationVariable speed triggerTorque limiter3 functionRotary onlyRotary hammerHammer onlyDouble insulated Blows per Minute: 1,650-3,300bpmNo Load Speed: 315-630rpmInput Wattage: 850wMax Bit Diameter: 32mmMax Core Diameter: 90mmImpact Energy: HR310C: 5.6 JoulesHR3210FCT: 6.4 JoulesWeight:HR310C: 5.2kgHR3210FCT: 5.4kg Chuck type: SDS plusVibration drilling : 2.5 m/sec²Vibration hammer drilling: 10 m/sec²Vibration chiselling: 7 m/sec²Vibration K factor: 1.5 m/sec² Supplied with: Side handle, depth stop, bit grease, carry case. HR3210 FCT also supplied with Quick Change Chuck.

Faithfull heavy-duty clamps manufactured from a high quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a Black Oxide coating with powder coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.