TS-BT35F01 3.5mm bluetooth Audio Transmitter Receiver A2DP Stereo Dongle Adapter for TV PC SubwooferThis is a High Quality 3.5mm bluetooth Stereo Audio Transmitter.It compatible withHi-Fi, PC, PSP,Nintendo DS, CD/DVD, lPod,lPhone, lPad, MP3, MP4, PDAs, PMP playerwith 3.5mm audio socket, enabling such devices to become bluetooth and you canenjoywirelessly with your bluetooth stereo headsets, receivers.Feature:1.Transmits high fidelity stereo music to bluetooth receiver device,enjoy the music without wire restriction.2.Connect to bluetooth-disabled audio device via 3.5mm audio plug,make it able to work with bluetooth A2DP headset/speaker.3.Plug and play, no need installation.4.Built-in rechargeable li-battery, can work for 5~7 hours after fully charged.5.Compact size, portable and lightweight.Specification:bluetooth version2.1+EDRbluetooth profilesA2DP / AVRCPFrequency2.4GHz~2.4835GHzEffective rangeup to 10mInput voltageDC 5VCharge timeApprox.2~3 hoursWork timeApprox. 5~7 hoursPackage Included:1 X bluetooth Audio Transmitter1 X USB Charge Cable1 X User Manual(English)
Specifications:- Material: Metal + Plastic- Size: Approx. 390150140mm/ 15.3565.915.51- Voltage: 12V- Power: 8000W- Fuel: Diesel- Complete combustion rate: 100%- Fuel consumption: 0.1~0.24L- Working temperature: -40C~80CFeatures:- Get rid of damage to car causing by the sudden drop of temperature.- Low noise: noise reduction processing with minimal noise.- Easy installation: the compact design is good for using in a variety of narrow spaces.- Two working modes: air condition modeheater mode.- Low fuel and power consumption for longer periods of operation.- Smooth, automatic room temperature control with temperature pre-set facility.- With continuous monitoring and diagnostic system.- Fuel supplied from the vehicles own tank.- Applicable to: various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc.Package included:- 1 x New LCD Dynamic Thermostat- 1 x Air Heater- 1 x Silencer1 x Four Tunnel Remote Control (Batteries NOT included)- 1 x Tank(10L)- 1 x Wire Bundle- 1 x Vent- 1 x Air Outlet Pipe- 1 x Intake Pipe- 1 x Exhaust Pipe- 1 x Oil Pump- 1 x Fixed Plate- 1 x White Oil Pipe- 1 x Oil Nozzle- 1 x Fastener- 1 x Installation Kit
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Especially designed for junior riders, the SCOTT Buzz MX Pro Goggle is optimized for smaller faces. It provides a maximum field of vision, not to miss out on anything while riding. The large lens offers the possibility to mount a SCOTT WFS roll-off system and is equipped with WORKS pins on it. The no-slip silicone strap gives perfect goggle stabilization which makes it a perfect choice for junior riders looking for the best SCOTT technologies. Fit Optimized for smaller faces Features 2-Layer face foam No-slip silicone strap Lens Technologies SCOTT Truview single WORKS lens NoFog Anti-Fog lens treatment
