Libre
Soutien
'Wirbelsäule EVC' ist 100 % made in Italien Rückenprotektor studierte an um der Wirbelsäule vor Kollisionen zu schützen, und bietet eine gute Lordosenstütze. Rücken-Protektor ist bequem, weil es folgt und Mass es die natürliche Vorwärtsbewegung der Wirbelsäule.Hauptmerkmale: CE EN1621-2 LEVEL 2 genehmigt (ca. 7 kN); Anti-TORSION SYSTEM gegen anfällig Verdrehung des Rückens; Perforierte Kunststoffschale Belüftung erhöhen und für zusätzlichen Schutz; Kontaktschicht gemacht von S.R.T. (Schweiß entfernen Textil – sehr transpirierenden 3D Textil, die Schweiß nach außen überträgt); Interner Speicher auffüllen (Multi-IMPACT) machte der E.V.C. (Stadtportal viskoelastische Zellen - innovative wasserdichte Anti-Schock-Material); Abnehmbare Hosenträger. Taille-Größe (cm): XS (70 TO77) - S (78 TO85) M (86 TO93) - L (94 TO101) XL (102 TO114)
The X-lite X-661 is the new X-lite Touring helmet that maintains a distinctly sporty feel. Available in three outer shell sizes, this helmet features the eye-catching design of the air intakes and rear spoiler, as well as the fully adjustable inner VPS (Vision Protection System) sunscreen.
The Touring Performance inner padding is made from latest generation fabrics, which, together with the monoblock cheek pads, ensure ultimate comfort and consistent performance even over long distances.
The helmet also features a high quality finish and reflective inserts, as well as outstanding features common to all models in the X-lite range.
Finally, the X-lite X-661 is equipped with a DD-ring retention system and is set up for the N-Com X-Series BX4 PLUS communication system.
Features:
Outer Shell made of Composite Fibre Three Outer Shells Wind Protector Lining/cheekpads: removable, washable, breathable, antibacterial VPS (Vision Protection System) Sunvisor Quick Release Visor Ultrawide Visor Double Action: Device allowing the visor lock to prevent accidental visor opening at high speeds DD-Ring closure ECE 22.05 Visor ready for Pinlock prepared for N-Com X-Series communication system
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
GORE-TEX® Handschuh mit Gore 2in1 Technologie von Held - höchste Taktilität, wasser-/winddicht, atmungsaktivFutterKammer 'dry' mit Pique-Push-Pull Fütterung (100% Polyester) Kammer 'breezy' ungefüttert MembraneGORE-TEX® Membrane basierend auf PTFE-Material wasser-/winddicht, atmungsaktiv Komfort/AusstattungGORE-TEX® 2in1 Technologie (1 Kammer wasserdicht, 1 Kammer ungefüttert) Klettverschluss an Handgelenk und Stulpe Visierwischer Stretchmaterial-Einsätze (100% Polyamid) auf der Oberhand Oberhand perforiert gestochene Unterhand für perfekte Atmungsaktivität und Taktilität SicherheitKnöchelschutz durch Hartplastikschale Handballen/Handkanten-Verstärkung mit SUPERFABRIC® brand material (32%Polyester, 68% Epoxidharz) 3M-SCOTCHLITE™Einsätze Innenhandverstärkung Damengrößenschwarz 01: D-6, D-7, D-8Damen kurz schwarz 01: K-D6, K-D7, K-D8Damen lang schwarz 01: L-D6, L-D7, L-D8Farbenschwarz 01schwarz-grau 03
Imperméable et respirante avec insert intégré Fermeture avec lacets, poche sur la langue pour stocker les lacets, caché des oeillets 2 paires de lacets livrés: 1 noir et 1 en contraste Facile à mettre grâce à une fermeture zippée sur la face interne Bande Velcro sur le devant pour un bon maintien de la cheville Semelle extérieure exclusive anti-dérapants Semelle intérieure antibactérienne Préformées pour s'adapter aux repose-pieds renforts internes et externes sur le renfort malléole et carbon-look sur sélecteur