Libre
Soutien
Die Standardversion des PRO-30 ist aus einem 50mm Alurohr gefertigt und 2mm dick, es gibt aber auch gegen Aufpreis ein 48mm Alurohr (3mm). Das ist das gängigste System für Discos, Bühnen, Theater und viele andere Veranstaltungen. Das PRO-30 ist in folgenden Ausführungen erhältlich: 2 Punkt (Step System), 3 Punkt (Traingle) und 4 Punkt (Square System). Die System-Elemente werden mit konischen Verbindungen zusammengefügt.
Solar Powered Light Sense Wind Spining LED Hanging Lamp
Das optisch sehr edel anmutende \"RECPanel\" ist für eine Wandmontage vorgesehen und dient der Bedienung des DMXREC per Touch-Pad-Control. Es kann in bei Installationen dezent in für das Personal zugängliche Bereiche installiert werden. Die Verbindung zwischen Recorder und Panel wird mit einem einfachem Netzwerkkabel (nicht enthalten) hergestellt. Technische Daten Anschluss: RJ45 (Kabel ist nicht in der Lieferung enthalten) Einbauart: Wandmontage (Unterputz) Abmessungen: 202 x 135mm Gewicht: 0,52kg
Der Showtec Dual Starforce ist ein breiter Dual-Moonflower. Mit nur zwei 4-in-1-RGBW-LED-Chips erhalten Sie eine leistungsstarke Auswahl an Strahlen, die in allen Farben leuchten. Wie viele andere Showtec-Lichteffekte ist der Showtec Dual Starforce mit IMC ausgestattet. IMC steht für Intelligent Music Control, ein spezielles Ton-zu-Licht-Modul, das auf Ihre Musik wie ein richtiger Lightjockey reagiert. Im vierstelligen Display können über das Menü Auto-, Ton-zu-Licht-, Master/Slave- und DMX-Einstellungen vorgenommen werden. Das Menü-Display kann gespiegelt und heruntergefahren werden, nachdem Sie Ihre Einstellungen vorgenommen haben. Dieser Moonflower der neuen Generation bietet alle Optionen, die Sie brauchen. Technische Daten Eingangsleistung: 100-230 V, 50/60Hz Leistungsaufnahme: 36 W Lichtquelle: 2 x 4-in-1-RGBW-Chip mit 10 W (CREE) Steuerung: Auto, Sound, Master/Slave, DMX DMX-Kanäle: 5 Steuerungs-Display: 4-stellige LED Netzanschluss: IEC-Ein-/Ausgang Datenanschluss: Ein-/Ausgang (XLR 3 Pins) Abmessungen: 233 x 280 x 343 mm Gewicht: 3,5 kg Optionales Zubehör: IEC-Kabel, 90465, 90466, 90466, EPC-1-Fern-bedienung (43098)
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
Der Marq Lighting Onset 120 WW ist ein ellipsenförmiger Profilscheinwerfer mit einer 120 Watt warm-weißen COB LED. Ausgestattet mit einstellbarem Shutter liefert der Onset 120 WW eine exakte Darstellung des Gobos. Sowohl die im Lieferumfang enthaltene 26° Linse als auch Gobo können mit industrieüblichen Modellen gewechselt werden. Über die 3-Kanal DMX-Steuerung lassen sich Sonderfunktionen wie Stroboskopeffekte und Abblendung ansteuern. Der Profilscheinwerfer lässt sich über DMX sowohl im Master- als auch im Slave-Modus betreiben und unterstützt Reihenschaltung dank integrierter DMX- und Strom-Ausgänge. Technische Daten DMX Kanäle 3 Lichtquelle 120W WW (3200K) LED Beleuchtungsstärke (26°) 3,150 lux @ 3M CRI 85 Stroboskop 0-20 Hz Stromversorgung 100-240 VAC, 50/60 Hz (auto-switch) Stromverbrauch 140 W Stromvernetzung Ja Abmessungen 700 × 260 × 250mm Gewicht 6.4 kg
