To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Ready for the serious work? The Equator does, because with its ventilation panels, separately removable thermo lining and Raintex membrane, the jacket is easy to adjust to the circumstances in which you drive! In addition, it is equipped with various reflective elements (also available in Night Eye) so that you are clearly visible and the jacket is packed with unique Macna specifications! Features 3-layer system with removable Raintex membrane and thermal lining Reflective elements on the chest and back Safe Tech protection on the shoulders and elbow, back protector prepared Vision vest prepared Ventilation panels on the chest Vential zippers on the forearm Ventilation opening on the back so that the wind can blow through the jacket Coat hanger Adjustable straps on the arms to create fit to your own body Easy cuff light Short connection zipper * "brighter view" represents the night-eye effect
Description:WaterproofShockproofEasy installation, direct bolt on to the stock mounting point.Classic design is perfect to upgrade your motorcycle.Lights have 2 wires, can be used for marker lights, auxiliary turn signals.Specification:Body Material: PlasticLens Material: PCVoltage: 12VLight Source: LEDLED Number: 12 LEDsShell Color: Black, ChromeLens Color: SmokeLight Color: AmberLight Style: SkullMounting bolt thread: 9.5mmWire length: approx. 35cmFitment: Universal for motorcyclesNote:1. Instruction is not included,professional installation is highly recommended.2. Please check the size measurement chart carefully before making payment.3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)4. The color of the actual items may slightly different from the listing images due to different computer screenPackage Included:1 X Pair Motorcycle Turn Signal Lights
Description:High Tensile Stainless Steel Overbraid.Apply for Fuel, Lubricant/Oil and Coolant.Made of RubberStainless steel, durable, lightweight and flexible.Specification:Outside: covered with Nylon and stainless steel wiresInner Pipe Material: CPE Synthetic materialWorking Temperature:-40 F to +350 FWorking Pressure:500 PSIBurst pressure: 2000 PSIPipe Connector Size: AN4 AN6 AN8 AN10 AN12Color: BlackFuel Line Length: About 3meterNote:1. Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.2. The colors may have different as the difference display, please understand.Package Included:1 X Braided Pipe6 X Pipe Connector
Die SCOTT Turn Pro DP Jacke mit DRYOsphere Membran ist einfach wie geschaffen für den Kampf gegen die Elemente und ist genauso robust wie bequem. Zu den Sicherheitsmerkmalen zählen Ellbogenverstärkungen, Protektoren an Ellenbogen und Schulter sowie eine High Density 500D Polyamid Konstruktion mit Hitena™-Verstärkungen. Diese Jacke ist bereit für starke Beanspruchung unter den härtesten Bedingungen. D-Sondergrößen für breitere Körper.Bequemer Kragen mit weicher Einfassung Automatisch schließender Kragen mit Magnetveschluss, mit zweiseitigem YKK FlexFix® avant Druckknopfsystem, sodass der Kragen für die gewünschte Belüftung offen oder geschlossen getragen werden kann. Temperaturkontrolle, dank Belüftungssystem an Brust, Rücken und Ärmeln Nierenwärmsystem auf der Innenseite Wasserdichtes Labyrinth-Verschlusssystem Front-Flap-Isolierung auf der Innenseite Safe-Tech Protektoren an Schultern und Ellbogen. Tasche für optionalen Rückenprotektor mit Größenhinweis Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Reflektierende Elemente für perfekte Sichtbarkeit 76cm-Verbindungsreißverschluss 1 wasserdichte Taschen innen Brusttaschen 2 wasserdichte Taschen am Bund, inklusive Handwärmertaschen Verstellsystem an Kragen, Taille, Saum, Ärmeln und Bund
