Libre
Soutien
Function:Sprinkle Sink Faucets; Style:Contemporary; Finish:Chrome; Number Of Handles:Single Handle; Valve Type:Ceramic Valve; Faucet center(Inches):0-1; Faucet Body Material:Brass; Faucet Spout Material:Brass; Handle Material:Zinc Alloy; Installation Holes and Handles:One Hole; Brand:Sprinkle; Features:LED; Shipping Weight:1.499; Net Weight:1.14; Listing Date:12/09/2015; Base Categories:Sprinkle Faucets,Hardware,Plumbing,Plumbing Fixtures
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.Finish: Black Powder coated.
The Stanley FatMax Hi Output Professional Glue Gun 200 Watt 240 Volt with fast warm up which means it is ready to use in just 60 seconds. Its ceramic element heats up quicker and holds heat longer with a 1133g per hour output. The standby mode takes 30 seconds to get back to working temperature. The hibernate mode stores heating after 30 minutes of non-use. The gun has a dual colour LED, red when below 170° and green when ready to use. Supplied with: 6 x 12mm General Purpose Glue Sticks.6 x 12mm Formula II Super Strength Glue Sticks.6 x 12mm Dual Temperature Glue Sticks. Specification Input Power: 200 Watt. (135°-210°).Heating Time: 1 Minute.Glue Output: 1133gr/hour.Glue Sticks: 12mm Dual Temp.
The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)
Faithfull universal engineers metal working hammer, precision ground with hardened striking faces to withstand the rigours of all metal working applications. Manufactured in accordance to BS876. Fitted with a traditional hickory handle.Weight: 1360g (3lb)