S.15 Socket 12in Drive 15mm

Style:Contemporary; Finish:Matte Black; Faucet Type:Rainfall Shower Head System; Installation Type:Wall Mounted; Flow Rate:3.5 13.2 / ; Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Showerhead Width:4040; Handshower Material:A Grade ABS; Faucet Body Material:Brass; Rain Shower Included:Yes; Shower Arm Included:No; Handshower Included:Yes; Bodysprays Included:No; Valve Included:Yes; Handle Material:Zinc Alloy; Drain Included:No; Installation Holes and Handles:Single Handle Three Holes; Features:Rainfall Shower,Handshower Included,Rain Shower; Shipping Weight:6.800; Net Weight:6.2; Listing Date:08/14/2018; Production mode:Self-produce; Special selected products:COD

The Metabo SSW 18 LTX Power Plus Cordless Impact Wrench has a 1/2 inch drive. This Compact Impact Driver is ideal for tough applications. The high torque abilities (220Nm) of this wrench make it suitable for tightening or removing the most stubborn of rusty nuts or bolts. This Driver also features the Variospeed (V) electronics and a special 3 speed change switch which comes in particularly useful when dealing with smaller fasteners. This tool also comes equipped with the standard Metabo multifunctional monitoring system to protect both the machine and the battery pack as well as the patented air cooled technology which enables faster charging and long service life of the machine. For convenience, this wrench also comes equipped with a robust support strap for securing the machine and an integrated worklight. Supplied with 2 x 4.0Ah Li-Ion batteries, a charger and a carry case. Specification Bit Holder: 1/2in Drive.No Load Speed: 0-900/0-1,650/0-2,300/min.Impacts Per Min: 0-1500/0-2700/0-3300/min.Max Torque: 100/140/210Nm.Weight: 1.6kg.

The Irwin carbide tipped mortar rake cutters are ideal for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable,pipes and switchboxes. They can be used with the Irwin mortar raker sole plate and small angle grinders.The Irwin IRW10507229 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size: 8.0 x 20/40mm

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10

The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.

ABUS Diskus 26 series padlocks have a pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull & manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks.'Deep Weld Technology' which offers maximum case strength. Where to use it: High security requirement in severe weather conditions The shackle is manufactured from hardened steel alloy and is protected in a stainless steel body. Key operated, key retaining (a key is needed for locking. Lock retains key until locked) The anti-cut plate provides 360 degree protection from sawing while a top quality welded seam secures against impact attack. Overall diameter: 71 mmOverall depth: 30 mm Shackle width: 19.5 mm I.D.Shackle height: 17 mmShackle Dia: 10 mm