R.S.T. Soft Touch Pole Sander Wood

Stahlwille Series 13 Combination Spanners. Metric sizes, with 15° offset ring end. They are drop forged from high-grade chrome alloy steel and chrome plated. Manufactured to DIN 3113 form A/ISO 7738 form A. The spanners are optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gently quenched in oil. They are extremely strong yet lightweight due to Stahlwilles's 'double-T profile'. Stahlwille's unique plating method prevents the problem of chrome flaking. The ring end of the spanners are equipped with an Anti-Slip Drive profile. This permits high transmission of forces to the flats of the nuts and bolts without damaging them.MADE IN GERMANY.Stahlwille Combination Spanner. Size: 24mm.Length: 280mm.

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

The Forge Padlock Bolts or Brenton Bolts are used to secure gates, or doors which require locking with a padlock. The Forge padlock bolt is designed for heavy-duty use with a strong steel bolt and locking collar. It comes in a variety of sizes and are either black powder coated or galvanised. Supplied with fixings for screwing into position and also bolt through fixings for additional security. Fitting Instructions: 1. Position Padlock bolt in the desired position and mark the square fixing holes with a pencil. 2. Drill holes using a Ø6mm drillbit and use the bolts provided to fasten in place. 3. Position the keep and ensure that the bolt moves freely through the hole.The FGEPBLTGAL6 Padlock Bolt has the following specifications: Bolt Length: 150mm.Finish: Galvanised.

The BlueSpot Bungee Cordshave a heavy-duty elastic design provides constant tension and a firm hold. Offering quick, convenient load binding with non-marring high strength hooks to eliminate knots. 12mm (1/2in) diameter provides maximum holding power and is ideal for tarpaulins, cars, trucks, trailers, bikes and motorcycles.These BlueSpot Tools Bungee Cords have the following specification: Size: 60cm (24in).Quantity: 6 Piece.

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 24 x 27mm.Length 263mm