peinture à l'huile à la main peint à la main abstrait voilier paysage mur art décoration de la maison décor cadre tendu prêt à accrocher Lightinthebox

This Forge classic Backplate Handle has a straight lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses. Supplied with screws and fitting instructions. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm Pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch, a privacy lock is built into the handle for use in WC's or Bathrooms where no mortice lock is fitted. The exterior handle has a lock over-ride which can be opened with a coin or screwdriver. Backplate size: 102 x 39mm.Finish: Chrome.

65L Transparent Clothes Quilts Storage Bags

Few things are more dispiriting than turning the ignition key and hearing nothing. Just when you need your car to start, it plays dead. Worse still, it's probably your fault. Look at the lights switch - did you leave them on? Modern car batteries are very reliable, but leaving the lights on for a few hours will soon discharge them. Even a boot light or an interior light left on overnight can flatten a battery. And a car left standing for a month or so may discharge its battery just from the current drawn by the alarm.To start a car with a flat battery you need the S Style SSJL200, a set of good quality heavy-duty cables with beefy clamps at each end, and a friend is also a good help! Your friend must have a car with a battery in good condition, this will aid in the success on starting your flat battery. Simply position another car near yours so that the batteries are close, but do not let the vehicles touch. Connect one end of the SSJL200 red jump lead to the positive (+) terminal of the boosting battery (Do not let the other end of the red lead touch any vehicle metal components) and connect the other end of the red lead to the positive (+) terminal of the flat battery. Then connect one end of the SSJL200 black jump lead to the negative (-) terminal of the boosting battery and connect the other end of the black lead to a bolt or metal bracket, well away from the battery, on the engine block of the vehicle to be started is a good source. Ensure that the S Style SSJL200 jump leads cannot come into contact with any moving parts of either engine. Start the engine of the boosting vehicle and run it at a fast idle speed for a few minuets. Now turn the ignition to start the engine of your vehicle, the S Style SSJL200 will pull power from the boosting battery to help your battery back to life. Check that your vehicle is running properly then carefully disconnect the SSJL200 and your on your way. 200 Amp.2.5m length.Jump lead with 10mm insulation.Supplied in poly bag with euro slot.

The Faithfull natural stiff Bassine broom heads provide an all round good sweeping performance. They are designed for dry use. These broom heads come complete with a handle and stay.The Faithfull FAIBRBAS24H Bassine broom head comes complete with handle & stay with the following dimensions: 600mm (24 inch)

The Bahco P51H-SL Professional Hedge Shears are for professional use in parks, topiary gardens and nurseries. They have fully hardened blades with a partly serrated edge. The extra long, lightweight aluminium handles offer a good reach and reduced fatigue is provided through superior cutting performance and very comfortable handling. Length: 730mm.Capacity: 10mm. Weight: 1.76kg.

Quantité:1 pc; Forme:Robot; Type:Moules à gâteaux; Application:Anniversaire,Multifonction; Matériau:Silicone; Type:Moules à gâteaux; Caractéristiques:A Faire Soi-Même,Multifonction,3D; Dimensions nettes:0.0000.0000.000; date d'inscription:08/05/2020; Produits spéciaux sélectionnés:COD