Pro'sKit 8PK - 3001D profesional 7 en 1 precisión electrónica pelacables y cortador alicates eléctricos (AWG 30/28/26/24/22/20)

6303A TU pipa de agua tijeras mango bicolor rama corta rápido Portable de la pipa del PVC Cutter cortador de tubos

The Makita 9920 Belt Sander has the following features:- Variable speed control.- Constant speed under load.- High power for stock removal.- Flat top for inverted applications.- Dust bag.- Long cable for sanding runs.- Double insulated. Technical specifications:Belt Size: 76 x 610mm.Belt Speed: 210 - 440m/min.Power rating: 1,010 watt.Vibration sanding: 2.5m/sec².Vibration K factor: 1.5m/sec².Noise sound power: 96 dB(A).Noise sound pressure : 85 dB(A).Noise K factor: 3 dB(A).Net weight: 4.5kg. Supplied with:Abrasive belt.Cork/carbon pad.Dust bag.The Makita MAK9920 Belt Sander Variable Speed uses 240 volt.

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 100 Bag 10

The Ridgid SeeSnake® nanoReel is ideal for inspecting places where previously only bore scopes were able to reach. Suitable for boiler tubes, supply lines, sprinkler systems and a wide array of speciality applications. Featuring a small 15.5mm camera head that is capable of tight turns, 90° arcs from 30mm upwards without difficulty. The unit is lightweight and compact, allowing easy transport and efficient storage. Offers multiple monitor compatibility, can be used with a SeeSnake® monitor or micro CA-300 and microEXPLORER™ Digital Inspection Cameras. The inner drums are interchangeable to cover different applications.

Succeeding the HP330 which was developed by adding hammer mechanism to drill driver model DF330D. Coming from solid tried and tested heritage but with slide on Compact eXtreme Technology Batteries. Featuring increased motor power for higher application speed and a max tightening torque. The rubberised handle has been designed for best grip and maximum thrust to the bit. A single LED joblight has pre-glow and after-glow functions handy for working in dark conditions.

30mbar 1.5kg/h Butane 20mm regulator - snap on compact. Conforms to EN12864 standards. Type: IGT Type A100.Max Inlet: 7.5mbar.Max Outlet: 30mbar.