Furygan Luxio, zip hoodie

Features
Wind mask neck warmer softshell Leveling the NeckAir vents at the mouth and nose ergonomic collar

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The certified Meta DRYSTAR® is a hybrid urban sport riding jacket that is packed with class-leading protection. Subtle, simple styling features a mixed premium buffalo leather and polyester fabric chassis complete with a detachable hood and removable vest thermal liner with micro polar fleece lining to suit a variety of urban riding conditions. It also has the ability to upgrade to Alpinestars Nucleon chest and back protection. Features
Main chassis fuses premium leather and poly-fabric with a cotton touch feel. Waist adjustment offers personalized riding fit and improved levels of comfort. Features Alpinestars 100 per cent waterproof and breathable DRYSTAR® membrane. Micro polar fleece vest with lining for comfort and thermal retention. Two convenient zippered hand pockets plus inner waterproof wallet pocket for peace-of-mind storage. Direct ventilation openings strategically positioned for optimized airflow when opened. Low profile collar construction with microfiber comfort edging plus 3D textured fabric inner collar lining for comfort. Detachable hood with shock cord adjuster. Pre-curved sleeve construction reduces fatigue when riding. Printed logos and reflective detailing to ensure the rider is visible to other road users. Certified level 1 Bio-Light shoulder and elbow protectors. Chest and back compartments (Alpinestars Nucleon chest and back inserts available as accessory upgrade). Multiple snap button system to integrate the Level 2 certified Alpinestars Nucleon back protector. Waist connection zipper allows attachment to Alpinestars riding pants.

New Travel Line: good-looking technical luggage that is practical and easy to use for long journeys. Developed with Trail bikes in mind, this tank bag is available with either the Baglocker or universal TAB fixing systems. Features
Capacity: 20 l (expandable + 5 l) Baglocker and universal TAB fixing systems Reflective prints and piping Map holder Side pockets Shoulder straps Rain cover Anti-theft brake lock bag available separately Retention system sold separately

The Answer Racing AR-1 helmet is our best value helmet ever, all while passing two of the toughest safety standards by exceeding D.O.T. and ECE. A dual-density EPS liner helps to absorb both large and small impacts while a highly developed ventilation system consisting of two large intake ports and four large exhaust ports help keep you cool in the hottest conditions. Features
Meets or exceeds D.O.T. FMVSS 218 safety standard
 Meets or exceeds both ECE 22-05 and D.O.T. FMVSS 218 safety standards Shell made of injection molded Acrylonitrile Butadiene Styrene (ABS)
 Sculptured, dual-density, EPS impact absorbing liner
 Removable/washable liner is made with moisture wicking fabrics
 Flexible rubber nose piece helps deflect roost
 Two large front air intakes and four rear exhaust vents help keep you cool Double-D straps weight ca. 1.43 kg

Weather type
All-weather Waterproof
Lining
Raintex DL membrane detachable thermo liner
Visibility
Side Eye
Protection
hip protector prepared adjustable Protection at knee (Knox)
Other specs
Flexibelt 2.0 Heatshield Long connection zipper Short connection zipper Pockets on upper leg Suspender prepared Waist lock