Libre
Soutien
Features: Aluminum alloy housing design, low noise and stabilized voltage supply. A lightweight power supply with 1 input jack and 10 output jack. Powers eight 9V guitar effects, one 12V guitar effectsand one 18V guitar effects all at once without losing any signal intensity. Blue LED for power lights in normal using mode. When output jack has short-circuiting situation, thecorrespondingLED light go outautomatically.It goes in self-protection mode and it will auto-restart in about several seconds once you unplug the guitar effects. Foldback current limiting circuit provides ultimate protection against power shortages and overloads. The maximum current of No.1 to No.7 output jacks is 100mA for powering normal guitar effects. The maximum current of No.8output jack is 500mA for powering digital guitar effects and low power digital guitar amplifier. Adaptor of 100V-240V input and 18V output. Enjoy the quiet and cool operation of a fully regulated power supply. Connections: 1)Plug the included adaptor into 18V in jack. 2)Connect the adaptor to 100-240V power, the blue LED will light, if you use other adaptors, make sure the output is 18V rated at 1000mA and the plug is positive barrel and negative center type. 3)Connect your 9V guitar effects to the eight 9V outlets with included DC cables. 4)Connect your 12V guitar effects to the 12V outlet with included DC cables. 5)Connect your 18V guitar effects to the 18V outlet with included DC cables.
The BMS 4510ND Planar wave driver radiates a coherent planar wave front form a rectangular piston without internal diffraction for superior dispertion control and high fidelity sound. This distinctive new transducer was engineered to work with 4-inch (4\" x 1\") rectangular throat waveguides providing extremely high sensitivity. The 4510ND is optimised for 10° vertical dispertion and allows a horizontal coverage from 60° to 120° depending on the waveguide used. The unique design of the 4510ND planar wave driver allows perfect acoustical coupling of individual units to create virtually continuous line source. The driver contains a high energy neodymium magnet system and a unique annular ring diaphragm. The ring diaphragm works similar as a wound 140 mm long ribbon diaphragm providing linear frequency response up tp 20 kHz. The unique planar wave phase plug provide a coherent planar wave front without internal diffraction. Technische Daten Unique Planar Wave Design (patent pending) Neodymium Magnet Assembly Perfect acoustical coupling of individual units to create virtually continuous line source 112 dB sensitivity 1 W / 1 m 1 kHz Crossover Extended high frequency response up to 20 kHz
Features: 4/4 violin bow equipped with high-quality black horsehair. Carbon fiber round stick with squared patterns. Ebony frog with decorative flower pattern, exquisite workmanship. Well balance and weight distribution for smooth playing. Making nice and bright sound while playing violin.
Diese robuste Tragetasche aus wasserabweisendem 600D Nylon fasst vier Gravity Vari-Poles®. Sie ist zum Schutz der Klemmstangen 10 mm dick gepolstert, ebenfalls gepolsterte Trennwände verhindern ein Verkratzen. Zwei Tragriemen, ein Schultergurt und der kräftige Reißverschluss sorgen für eine leichte Handhabung. Technische Daten Produktart Ständer und Stative Zubehör Typ Transporttasche für Anzahl Stative 4 für Stativart Klemmstange Farbe schwarz Material Nylon 600D Stärke der Polsterung 10 mm Verschluss Reißverschluss Breite 2150 mm Höhe 430 mm Tiefe 120 mm Gewicht 3,5 kg
Bei der Wiedereinführung in 2015, hat Hagstrom ein besonderes Augenmerk darauf gelegt, die Seele der klassischen Impala und Condor Originale einzufangen. Gleichzeitig wurden wichtige Verbesserungen integriert, die Gitarristen von heute schlicht und einfach erwarten. Das Halsprofil wurde dezent abgerundet, die Balance zwischen Hals und Korpus optimiert, so dass die Gitarren perfekt am Gurt hängen, und die \"Vintage Tremar\" Vibratoeinheit gnadenlos auf Stimmstabilität getrimmt. Darüber hinaus bietet die neue, verbesserte Schalterleiste, moderne, verlässliche und ergonomische Schiebeschalter an, welche die Funktion und das Aussehen der Originale spiegeln. Da sich der Klang der Impala und Condor Urversionen, so fest in die Herzen der Spieler gebrannt hat, wurden wirklich alle Hebel in Bewegung gesetzt, um den Original Tonabnehmern auf ganzer Linie Tribut zu zollen. Die harte Arbeit hat sich vollends gelohnt, denn Hagstroms AlNiCo 5 \"Retro-S\" Pickups bringen nicht nur den essentiellen 60ies Sound perfekt rüber, sondern halten auch die Tür für moderne Klangwelten weit geöffnet. Bei der Impala tönen zwei dieser charaktervollen Einspuler und bei der Condor lassen drei AlNiCo 5 \"Retro-S\" keine Klangwünsche offen. Technische Daten Korpus Holz: Mahagoni Bauform: Asymetrischer Doppelcutaway Binding: Keins Hals Halsverbindung/Bauform: Eingeleimt Holz: Mahagoni Profil: D Halsspannstab: H-Expander? Griffbrett/Sattel Material: Resinator? Radius: 15\" Einlagen: 6 mm Pearloid Dot Bünde: 22 Medium Jumbo Mensur: 24.75\" (628 mm) Sattel: GraphTech Black Tusq XL Sattelbreite: 43 mm Elektronik Tonabnehmer: 2 x AlNiCo-5 Retro-S Tonabnehmer Wahl Schiebeschalter (L nach R in Spielposition): Hals PU An/Aus; Hals Tone PU An/Aus; Steg PU An/Aus; Steg Tone An/Aus; Mute An/Aus; Top (Bass Cut) An/Aus Regler: 1 x Volume mit R/C Tone Schaltung Kill Switch in Höhe oberer Cutaway Hardware Brücke: Long Travel Tune-O-Matic Rollenbrücke Saitenhalter/Vibratoeinheit: Hagstrom Vintage Tremar Mechaniken: Hagstrom 15:1 Die Cast Saitensatz: D?Addario EXP110 (10-46) Optionales Zubehör Hagstrom Case tbc Hagstrom Bag HSBGE20
Features: High-quality compressor guitar effect pedal. With LEVEL, EQ and COMP adjusting knobs for you to get a great range of sounds. True bypass, and with LED light for indicating effects or bypass status. Aluminum alloy shell, durable and sturdy. Dual power supply choices (9V battery or DC 9V power adapter) for convenient usage.(not included)