A professional 1/4in square drive matt chromed deep hexagon socket. Produced in accordance with ISO 9000 and AS 954 specifications. Features the Teng Tools hip grip system for increased torque and reduced risk of rounding fasteners. Overall Length: 49.5mm.Size 9mm
These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200
Arrow T18 wire cable tacker with all steel construction, the chrome finish resists wear and tear. The grooved driving blade and grooved guide ensures perfect stapling with jam resistant mechanism and a short span easy compression handle. Designed to accommodate smaller wires and cables up to 5mm diameter, suitable for telephone, intercom and burglar alarm wiring. The T18 takes 3/16 x 3/8 leg (ARRT1838) & 3/16 x 7/16 leg crown staples (ARRT18716)
Roughneck Gorilla Gripper is a safe and easy way to grip, lift and carry all types of sheet materials, doors and worktops. Made from aircraft quality aluminium with special rubber gripping pads. Significantly reduces stress and potential injuries to your back, shoulders, neck, hands and fingers. A must for those handling large cumbersome boards and doors on a daily basis. Soft-grip cushioned handle with 3 sizes available, up to 19mm, 10 to 28mm and 35 to 50 mm, to handle the majority of board and door thicknesses.This Roughneck ROU32620 will clamp easily to boards or doors from 35mm up to 50mm for ease of movement around rooms or work site.
Evolution's Electric Disc Cutter easily cuts Concrete, Stone, Brick, and Paving, even reinforced concrete, with the supplied diamond blade.The powerful 2400W motor makes easy work of the most robust materials and because it is electric there are no harmful fumes, making it ideal for work in enclosed areas.The ergonomic support handles are ideally positioned for perfect balance when cutting and the spindle lock mechanism means blade replacement is quick and simple.Technical Specifications:Motor: 2400WSpeed: 5000/minDisc Diameter: 305mmDisc Thickness: 2.0mmBore Diameter: 20 / 22mmDisc Weight: 1.78kgMax Cutting Depth: 100mmMachine Weight: 9.5kgProduct Dimensions: 464x575x390mmRecommended Maximum Duty Cycle: 20minsSound Pressure Level (Under Load): 102.4dB(A)Vibration Level: 4.8m/s2Gross Weight: 11.82kgIncludes:Dust Extraction PortSpannerOperator's Manual1 x Blade
