Libre
Soutien
Acerbis Fuel-Container
features Material: Polypropylen capacity: ca. 18 Liter
essential oil from aromatruth lavender for diluting with a carrier oil for massage or aromatherapy use supplied in 10ml bottle
Description:Material: PlasticUSB Number: 3Input voltage: DC36V-120VOutput voltage: 5VOutput Current: 1ASize: 7.4 * 4.8 * 2.4cmCable length: 47cmPackage Included:1 X Electric Bicycle Mobile Phone Charger
Description:1.5-in-1 Multiple Attachments. Cordless vacuum cleaner comes with 5 different attachments.Brush attachment for cleaning sensitive surfaces and removing animal hair from textiles.Rubber nozzle for cleaning up the spilled drinks. The crevice nozzle for cleaning hard-to-reach surfaces.;2.One-step To Remove Garbage. Car vacuum cleaner can help you to remove the garbage in one click.Just press the button, remove the vacuum container and empty the trash without touching the dirt.;3.Compact Design and Easy To Stow. The ergonomic design of hand vacuum cleaner allowsone-handed operation. morden and simple, the storage is a breeze.;4.Quick Clean You Home and Car. Handheld vacuums can quick clean up all garbage in seconds,great for cleaning dust, crumbs, as well as spilled milk and coffee. Show you a clean living space.Specification:Type: USB Cordless Car Vacuum Cleaner/12V Car Vacuum cleaner(With cable)Color:BlackVacuum degree: 3500paRated speed: 3500rpm(min)Rated power: 120WPower cord length: about 5mInstructions For Use:1.Check if the charge is sufficient.2.Opened the switch.3.According to different use occasions to replace the use of different nozzles.4.This product is a wet and dry vacuum cleaner. Pay attention totimely opening the front cover drain when absorbing water.5.Rechargeable battery USB display red for normal charging, green for full.6.Charging time is about 3-4 hours full, full of sustainable use for 20-30 minutes.Note:1.Due to the light and screen difference
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
* Chopper Figure * Clip with Wire * Available in 4 different Designs | Article: Booster Chopper Clip | Article: Booster Chopper Clip
