Winter Snow Booties Pet Puppy Waterproof Soft Shoes

Premier is one of the most historic and oldest brands in the motorcycle helmet world. In 2014, Premier s program is extended with a retro full face helmet, which is not only improved in fitment but also graphically and all other components. The Trophy line is based on the shape of the helmets from the 70s, but equipped with the latest safety standards. Features
The outer shell is formed using fiber DCA: a carbon fiber and aramid fiber blend and reinforced with Dyneema by epoxy resin The inner shell has been formed by a variety of EPS that is best able to absorb the energy, caused by a fall The interior is perfectly matched to the harmonious retorstyle and is made of anti-allergic material and synthetic leather, like the cheek pads The Trophy helmet is equipped with a double D-ring closure Like all Premier Helmets is the Trophy also tested according to current European legislation ECE 22-05 Weight: 1200 + - 50 gr

Our Budapest style Sixty is a women s boot designed specifically for riding motorcycles. Of course this classic leather boot has all important features required of a modern motorcycle shoe. The combination of genuine cowhide and added XTM-Fiber ® membrane (fiber technology made from DuPont ™ Kevlar® Coolmax® and Lycra®) give this boot its high functionality and the respective protection in extreme conditions. So the Sixty by John Doe provides additional abrasion protection over regular leather motorcycle shoes. Another feature is the John Doe Threepoint-Protection, meaning additional reinforcement at the ankle, heel and front. All of our motorcycle shoes of course also have a "waterstop function" (like trekking and hiking shoes), i.e. the tongue is designed to prevent water from quickly seeping into the shoe at the laces. The "easy entry" to the shoe via zipper allows the rider to quickly and easily put the shoe on and take it off without unlacing for added comfort. An oil-resistant, vibration absorbing non-slip sole is also standard on our JohnDoe motorcycle shoes. The beautiful Budapest pattern and details such as a John Doe logo embossed in leather on the ankle protection and the JDM metal emblem on the tab round off the classic design of our "Sixty". Material & Details
XTM protective fiber: Crash side 100% DuPont™ Kevlar® aramid fiber / skin side 100% Coolmax® Vintage cowhide 1.1mm Water repellent and breathable Threepoint Protection (reinforced ankle, heel and front) Reinforcement/protection for shifting Waterstop tongue Oil resistant, vibration absorbing non-slip sole Approved by TÜV Rheinland Handmade in Portugal Easy Entry YKK zipper

The BLAZE saddlebags with removable support arms impress with their sporty appearance, light weight and smart attachment system. Developed specifically for sporty motorcycles, the saddlebags have a minimal effect on driving characteristics. When travelling without luggage, the removable support arms can be detached with a simple step, leaving only inconspicuous holders behind on the bike. The bike-specific developed removable support arms, a powerful hook and loop fastener and an additional safety belt with click fastener ensure the best grip and prevent the bags from swinging or flapping - even at high speeds. BLAZE Saddlebag
BLAZE saddlebags with bike-specific removable support arms allow vehicles to be converted from sporty motorcycles to touring vehicles in seconds Light weight and sporty look A powerful Velcro strap additionally secures the left and right saddlebags and offsets the weight of the luggage Zippered volume expansion Main pocket is loaded from the top Outer pocket with zipper Practical carrying handle Reflective details for more safety in traffic Made from durable, highly UV-resistant 1680D ballistic nylon with water resistant interior coating
BLAZE Removable support arms
Removable support arms prevent contact between saddlebags and tires One-time mounting of the bike-specific, inconspicuous brackets for the removable support arms Removable support arms attachable and removable in a few simple steps Material: Stainless steel / Polyamide Color: silver / black
Included in delivery
2 x BLAZE Saddlebag 2 x BLAZE Removable support arms 2 x Waterproof inner bags 1 x Adhesive protective foil Mounting instructions Mounting material
Details
Material: 1680D Ballistic Nylon / 1680D Ballistic Nylon Color: black / grey Size: 44.0 x 14.0 x 30.0 cm / 17.3 x 5.5 x 11.8 in Total Weight: 1.2 kg / 2.6 lb Capacity per bag: 14.0 - 21.0 liter Total capacity: 28.0 - 42.0 liter
Matching

Manufacturer Model Model year


HONDA CB 600 F 2007-2013

HONDA CBR 600 F 2011-

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Description:The surface of plating color,gloss and color saturation to keep for a long timeScrew can adjust length and angle, free telescopic positioning, to provide a variety of installation effectsSpecification:Material: Aluminum alloyVoltage: 12VColor: Red,Blue,Black,Orange Red,Green,SilverWiring Guide:Red is positiveBalck is negativeFitment:For YAMAHABWS125 R25R3MT03MSX125 MSX125SF/KAWASAKI Z800 KAWASAKI Z1000 and so onPackage Included:1 X Motorcycle CNC License Plate Holder1 X LED Rear Light

Specification:Type: 11PCS Sets5seat covers: 28*26cm2 seat front seats: 118*56cm1 backrest: 135*76cm1 rear seat cushion: 135*56cm2 shoulder pads: 22*7cmMaterial: fabricFeatures:1. Easy to install and clean, high quality.2. Comfortable, breathable, dust-proof, dust-proof and durable.3. Four seasons universal, high-end fashion.4. Universal fit, fits most vehicles.Package Included:5 * seat covers2*seat front seats1*backrest1*rear seat cushion2*shoulder pads