Jopa Sonic S18, textile pants

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

The Lucid jacket is a direct descendant of our popular Enterprise jacket, albeit in a shorter version. The Lucid comes in a clean, predominantly black design and offers the base functionality of a touring jacket. This includes a waterproof outer shell thanks to the incorporated hydratex® membrane, a removable thermal liner and various adjustment options. Thanks to the short connection zipper it can be attached to various Rev it! trousers, and the Lucid is standard equipped with protectors at shoulders and elbows. Optionally the jacket can be equipped with our Seesoft™ level 2 back protector and the Vest Connector HV for added visibility. Features
detachable thermal liner Waterproof hydratex® G-liner (5000mm H2O) Breathabile hydratex® G-liner (5000g/m2/24hrs) Knox® Flexiform protection at shoulders and elbows prepared for Seesoft™ level 2 back protector insert laminated reflection at chest and elbows reflective logo at upper arms and back tour fit, regular adjustment tab at collar adjustment strap at hips adjustment tabs at upper arm and cuffs prepared for Vest Connector HV short connection zipper slit pockets inner pockets

180 JERSEY DESIGN AND FUNCTION
New moisture wicking polyester main body fabric for enhanced performance and comfort New vented side panels for enhanced airflow New asymmetrical mesh collar and light polyester cuff Drop tail keep jersey tucked in pant

Montaro Visor Matt White/Lime Small

Back in the States in the 1920s an icon was born. The classic “lancer-front” leather jacket. Within a matter of years, it had become so universally popular with riders that it was known as the “biker jacket”. And so it has remained. We’re bikers. It’s part of our history and who we are. So we couldn t resist recreating its iconic design. Streamlining it. Adding modern features and detail touches. Perfecting it to creating a unique new classic. The result says heritage and says it decisively, but never shouts. Elegant, minimalist lines. Integrated Pro-Armor protection. Premium construction. Black metal zips and buckles. Meet Chiodo72. It’s what biking’s all about. Features
1 inner pocket 2 outer pockets Pocket for G1 & G2 back protector
Ergonomy
Jacket-trousers connection loop
Material
Soft natural cowhide leather
Performance Shock
Pro-Armor: removable soft protectors certified to Standard EN 1621.1 on shoulders and elbows
Temperature
Mesh liner

Portable Brass Pocket COMPASS Sports Camping Hiking Portable Brass Pocket Fluorescence Compass Navigation Camping Tools