This Alfa Romeo 1900 CSS Touring (1956) Resin Model Car is Dark Blue and features comes in a display case. It is made by Neo and is 1:43 scale (approx. 9cm / 3.5in long).
Features:
With electronic compass and barometer.
SP Racing F3 Flight Control With Integrated OSD for Multicopter.
The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader.
There MEGA328 ISP port on the back of the board, will not deadlock bootloader.
Looptime up to about 2 times the previous generation based stm32F1 flight control.
Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time.
The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux).
Tiny and lightweight.
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing.
All using 2.54 interface.
PDB can be more perfect combination.
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
I2C port always powered, perfect for external sensors or always-on OLED screen.
Buzzer port for audible warnings and notification.
F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).
This Honda RC30 (Carl Fogarty - TT Winner 1990) Diecast Model Motorcycle is Red and features working paddock stand, steering, suspension, wheels. It is made by Universal Hobbies and is 1:12 scale (approx. 17cm / 6.7in long).
Features:
Visual LCD graphic symbol, brief key operation.
Automatic identification system voltage level, intelligent PWM charge mode.
Adjustable charge/discharge control parameters, settable operating modes of loads.
Multiple selection of battery.
Adds current display function.
Battery over temperature protection, low voltage/reverse polarity protection.
Over-load and short-circuit protection.
With dual USB 5V output.
This Pontiac Firebird Funny Car (Don Gay, Roy Gay - 1970) Diecast Model Car is Blue and Yellow and features working wheels. It is made by ERTL and is 1:18 scale (approx. 25cm / 9.8in long).
This Ford Taunus 17M P2 Coupe (1959) Diecast Model Car is Red and White and has working wheels and also comes in a display case. It is made by Ex Mag and is 1:43 scale (approx. 9cm / 3.5in long).
