Few things are more dispiriting than turning the ignition key and hearing nothing. Just when you need your car to start, it plays dead. Worse still, it's probably your fault. Look at the lights switch - did you leave them on? Modern car batteries are very reliable, but leaving the lights on for a few hours will soon discharge them. Even a boot light or an interior light left on overnight can flatten a battery. And a car left standing for a month or so may discharge its battery just from the current drawn by the alarm.To start a car with a flat battery you need the S Style SSJL200, a set of good quality heavy-duty cables with beefy clamps at each end, and a friend is also a good help! Your friend must have a car with a battery in good condition, this will aid in the success on starting your flat battery. Simply position another car near yours so that the batteries are close, but do not let the vehicles touch. Connect one end of the SSJL200 red jump lead to the positive (+) terminal of the boosting battery (Do not let the other end of the red lead touch any vehicle metal components) and connect the other end of the red lead to the positive (+) terminal of the flat battery. Then connect one end of the SSJL200 black jump lead to the negative (-) terminal of the boosting battery and connect the other end of the black lead to a bolt or metal bracket, well away from the battery, on the engine block of the vehicle to be started is a good source. Ensure that the S Style SSJL200 jump leads cannot come into contact with any moving parts of either engine. Start the engine of the boosting vehicle and run it at a fast idle speed for a few minuets. Now turn the ignition to start the engine of your vehicle, the S Style SSJL200 will pull power from the boosting battery to help your battery back to life. Check that your vehicle is running properly then carefully disconnect the SSJL200 and your on your way. 200 Amp.2.5m length.Jump lead with 10mm insulation.Supplied in poly bag with euro slot.
Heavy-duty gel formula hand cleaner that quickly removes deeply ingrained oil and grease soilings. Contains non-abrasive micro-polymer granules. With added conditioner to leave the skin feeling smooth after use.
The Union 3K75 series 5 Lever Mortice rollerbolt sashlocks are suitable for use on timber doors hinged on the left or right and are also suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side with the latch bolt being withdrawn by a lever handle from either side. It has force resistant, anti-pick and anti-saw security features and is available with square forend and striking plate with a 14mm bolt throw. They are also pierced to accept bolt through furniture. The 3K74E series locks are recommended for use on a front door in conjunction with a BS standard nightlatch. They are also covered by a 25 Year guarantee. Deadbolt: Brass, with hardened steel rollersLatch Bolt: Roller bolt (non handed)Follower: Sintered Iron, 8mm squareKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722 (standard)Cut Key Number: B-5LCNot suitable for master keyingRebate Kit B-3K74R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doorsVisi packed.Finish: BrassSize: 67mm