A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.All punches boxed singly without spanner, which should be ordered separately. Size.19.0mm.Square.Spanner Operated 5/8in AF.
The Norbar Adjustable Industrial Torque Wrenches have a robust construction, which gives accurate results to ±4%, even in arduous working conditions. Their large break angle improves accuracy by reducing the possibility of over torqueing and the cam control of the mechanism gives a controlled break which will not throw the operator off balance. The torque wrenches are dual scaled, with both N.m (Newton Meters) and lbf.ft graduations. Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017 and carry case for storage and protection. 3AR Industrial Torque Wrench Specification Drive: 3/4in Square.Range: 100 – 500Nm (70 – 350 lbf.ft).Torque Radius: 683.4mm.Ratchet Teeth: 36.Ratchet Type: Push-Through.Length: 910mm.Weight: 5.2kg.
The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.The FCM249G3 Sheathed Punch has the following specifications:Point diameter: 2.95mm.Length: 150mm.
The Faithfull TCT Paint Scrapers are ideal for removing paint, varnish and other coatings from wood. Tungsten Carbide blades are extremely hardwearing and will outlast steel blades by up to 100 times. The aluminium shaft is fitted with a comfortable soft-grip handle with an internal storage compartment for spare blades.The Faithfull FAIWSTCT50 TCT Scraper has the following specifications:Blade width: 50mm.Overall length: 275mm.
Useful for laying out and scribing circles beyond the capacity of ordinary dividers. Clamping device firmly holds points, which can be replaced with a pencil. The heads will accommodate a beam up to 9.5mm (3/8in) thick and 19mm (3/4in) wide. Beam is not supplied. 2 Trammel heads, 2 small points 150mm (6in).
