Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 300mm (12 in).Teeth 13.5 tpi
The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 50 mmOverall height: 77 mmOverall depth: 18 mm Shackle width: 28 mm I.D.Shckle height: 29 mmShackle Dia: 8 mm
Thompson's Patio & Block Paving Seal offers advanced protection for paving. It seals and protects against dirt and chemicals and resists penetration of oils and fuels. Contains effective biocide to resist moss and algal growth. Protects and helps maintain appearance.
The Dymo XTL Permanent Flat Surface Labels provide a professional, polished finish that is ideal for panels, blocks, faceplates, shelves, bins, beams and more. The labels are equipped with industrial-strength adhesive and the print will not smear or fade. They are jobsite tested and UL recognised. Suitable for use with XTL series industrial label printers.These Dymo Permanent Flat Surface Labels have the following specification: Colour: Black on White.Width: 12mm.Type: Continuous Tape, 9.1m Long.
Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).
