20 Unids Mini Tamaño 4x5mm Tierra Rara Neodimio Magnety Fuerte-magnético para Whiteboard Refrigerador DIY Artesanía Ciencia y Oficina uso

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10

BUSCADOR Profesional Puncher de cuero giratorio alicates Ojalero Puncher Heavy Duty Agujero redondo Herramienta de perforación para la correa de cuero Reloj Correa de banda Zapato Tarjeta de papel

The Faithfull Parallel slotted tip screwdrivers with high quality, correctly hardened and tempered Chrome Vanadium steel blades. With full size bi-material soft-grip handles for maximising user comfort and firm non-slip gripping. Each handle is colour coded with a drive icon displayed on the end for easy identification.The FAISDP200 Slotted Parallel Soft Grip Screwdriver has the following specifications: Type: Parallel. Tip: 5.5mm. Length: 200mm (8 inch).

Type:Tall / ­High Arc,Standard Spout; Finish:Electroplated,Nickel Brushed; Faucet Type:Kitchen faucet; Installation Type:Vessel; Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Installation Hole Diameter:3.5-4; Faucet Body Material:Brass; Installation Holes and Handles:Two Handles One Hole; Shipping Weight:2.095; Net Weight:2.15; Listing Date:04/22/2019; Production mode:Self-produce; Special selected products:COD

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

Metric combination spanners offset at 15° - DIN 3113A. Manufactured from chrome vanadium steel with a satin finish.Size 50mm.Length 540mm