Libre
Soutien
2nd choise item The helmet is in perfect condition except for the paint damage on the left side.
Features
Outer shells: 2 Kwikwick3™ Advanced fiber half shell to offer true wind-in -the-face freedom. Micrometric Automatic chinstrap buckle for quick release and precise adjustment. Supplied with a nice Scorpion Exo textile bag. ECE 22-05
Kwikwick3™ Moisture-wicking breathable helmet liner and cheek pads: Cool and dry in warm weather, warm in cool weather.
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Die Concept VTD Jacke ist die Basis des neuen Modular-Systems und steht für Vielseitigkeit schlechthin. In Kombination mit den anderen Produkte der Modular-Reihe passt sich dieses Allroundtalent problemlos an alle Witterungsbedingungen an. In der praktischen Tasche am Rücken hat die DP Concept oder die Insuloft Jacke Platz, damit du für alles gewappnet bist.Bequemer Kragen mit weicher Einfassung Automatisch schließender Kragen mit Magnetveschluss, mit zweiseitigem YKK FlexFix® avant Druckknopfsystem, sodass der Kragen für die gewünschte Belüftung offen oder geschlossen getragen werden kann. Belüftungssystem mit praktischem magnetischem Verschlusssystem Temperaturkontrolle, Dank Belüftungssystem an Brust, Rücken und Ärmeln Robuste Dreifach-Steppnähte SAS-TEC Protektoren an Schultern und Ellbogen. Tasche für optionalen Rückenprotektor mit Größenhinweis Die Protektoren werden für optimalen Halt am Obermaterial befestigt Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Wachsbeschichtung für noch mehr Strapazierfähigkeit Reflektierende Elemente für perfekte Sichtbarkeit 76cm-Verbindungsreißverschluss 2 Innentaschen 4 Außentaschen 1 Rückentasche Easy-fix Reißverschlusssystem an der Brusttasche Verstellsystem an Saum, Ärmeln und Bund
Specification:Color:BlackMaterial: Leather + PU+ Zinc Alloy KeychainButton: 4 Buttons ( Lock,Open,Trunk,Headlight)Features:* High-grade Leather and metal keychain, no rust, durable* Stable performance, no deformation, do not fade, can not fall skin* Original car key custom, shape complete in accordance with the original key designed, thin thread* This cover is designed to protect your car remote from accidents/scratching/dropping and for anti-vibration.Fitment:For Renault Clio Scenic Megane Duster Sandero Captur Twingo koleosNote:Please ensure your current original key looks exactly the same as the key cover in the picture at below.Package Includes:1 X Leather Key Cover(Not include remote Car key)
The Hoodie Denim Booster is a casual hoodie with Kevlar protection for use in the engine. The hoodie comes with Kevlar panels and removable protectors on shoulders and elbows. In addition, the hoodie s hood can be removed provided with several stab and breast pockets and inner lining made in mesh.
Other characteristics:
Casual hoodie with Kevlar protection for use in the engine. Kevlar panels on shoulders and elbows. Detachable hood. Double closure with zipper and buttons. Two side pockets and one inside, all with zipper closure. Two breast pockets, two buttoned lockable Equipped with removable protection on shoulders and elbows. Mesh lining on the inside.
Specification:Product Name: Cross BarColor: BlackMaterial: AluminumFront rack dimension: 42.5~44.5 length x 3 width x 3 heightRear rack dimension: 40.5~42.5 length x 3 width x 3 heightFitment Type: Performance/CustomManufacturer Part Number:K2-RRB-RAV413BKInterchange Part Number: RRB-RAV413BK 13 14 15 16 17Other Part Number: RRB-RAV413BK 2013 2014 2015 2016 2017Package Size: 111cmx23cmx14cm (LXWXH)Quantity: 1Pair/ 2PcsFeatures:-- Exactly the same as seen in pictures-- Comes 1 pair adjustable roof rack cross bars-- Made of high quality light weight durable aluminum-- Black satin powder coated finished - water proof and anti-corrosion-- Can support luggage, ladder or cargos weight up to 100lbs-- All necessary hardware and installation instruction are included-- Professional installation is highly recommendedFitments:(Please Compare The Cross Bar With Your Original One Before Purchasing!):For Toyota RAV42013-2017Package Included:1 x Pair Cross Bar