Liberon Fontenay base 30ml

Markal Dura-Ink are permanent, smear and water resistant heavy-duty felt tip markers with versatile bullet (15 and 55) and chisel tips (25), and are used in a wide variety of industrial applications. They mark on variety of surfaces inculding metal, wood, plastic, glass, rubber, cardboard, paper etc.Tub of 48

The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9130EURTBLK has the following specifications: 2 x 30mm aluminium with black vinyl cover padlocks - 18mm hardened steel shackle, 5mm diameter - 4-pins keyed alike

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.

Versión de actualización CNC 1610 GRBL Control DIY Mini máquina de grabado CNC con controlador fuera de línea con ER11 Área de trabajo 160 * 100 * 40 mm

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.