Libre
Soutien
This is a car alarm system with PKE-Passive keyless entry, remote engine start, push button start stop button.The alarm is easy to install and use and can improve your car safety greatly once properly installed.Features:Passive keyless entry system.Push button start/stop system.Service mode, mute mode.PKE function enable or disable.Detect car situation by itself, rolling code protection.Remote start/stop engine function.Illegal start alarm.Central lock automatication.Emergency disarm.One-button start/stop system.Intelligent handbrake detection.Intelligent oil pump start-up detection.Telecontrol tail box.Door unlock prompt.Anti-theft function.Specifications:Model: SQ886Relative humidity: 10%-95%Main unit system:Operation voltage: DC12V3VStatic current: 15mA (except indicator, sensor)PKE emission current: 40mAShock sensor current: 1mACoding: leaning codeFrequency: (high)433.92MHZ, (low)125KHZStarting system:Operation voltage: DC12V3VACC current: 30AON current: 30AStart current: 30ARemote control:Operation voltage: DC3VOperation current: 8mAStatic current: 8uACoding: leaning codeBattery: CR2032 3V 240mAh(included)Frequency: (high)433.92MHZ, (low)125KHZPackage size: 230 * 180 * 68mm / 9.1 * 7.1 * 2.7inPackage weight: 610g / 1.34lbPackage List:1 * Main Unit2 * Remote Controls1 * Push Start Button2 * Indicator Cable2 * Low-frequency Antennas1 * Start Cable1 * Function Cable1 * Use Manual
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Matière:Aluminium; Couleur:Blanc; Dimensions (cm):2.3 x 1.0 x 1.0; Poids (kg):0.05
Description:1-Made of aluminium alloy,long lasting finish.2-Tuned vents for fast hole.3-Improve handling and boat lift.4-A good choice for your outboard.5-Good design,high quality,and perform well,lightweight motor propellers.Specification:MaterialAluminumPitch11"Diameter9 1/4" (235mm)Color:BlackRotationStandardNumber of Blades3Number of Spline Tooth14Fitment:Fit For Mercury Outboard 9.9-20 HP9.9HP(Bigfoot)...2005 - 20139.9HP(Command Thrust)...2016 Newer15HP(4-stroke)...2007 Newer20HP(4-stroke)...2007 NewerCompatible For Tohatsu / Nissan Outboard 9.9-20 HP9.9HP(2-stroke)...1984 Newer18HP(2-stroke)...1985 Newer15HP(2-stroke)...1985 Newer12HP...1985 - 19889.9HP(4-stroke)...2000 - 200315HP(4-stroke)...2000Newer18HP(4-stroke)...2001 - 200820HP(4-stroke)...2007NewerPackage Included:1 X Outboard Propeller
When you traveling with luggage to the camping site or move equipment around, you would realize that your vehicle needs more cargo space. great for camping, sporting events or family travel where more storage space is needed. It will provide additional space to your vehicle which has roof rack side rails, crossbars or cargo baskets or even without racks.the cargo bag is waterproof so you don't need to worried about it even if it rains outside.Specification:Color:BlackMaterial: 210D Oxford Cloth(Waterproof)Size:about 96cm/37.80"x96cm/37.80"x46cm/18.11"[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]Features:Frame-less construction and thus can easily fold up when not in use.Double stitched seams design keeps luggage safe, dry and secure.With 8 strong quick release straps for easy fitting.Two-way high strength seal zipper making the loading of goods much convenient.Waterproof sealing design,all bag are Welded seams with Penetration resistant coating.Flap that covers the zipper help to against the strong wind,heavy rain or snow during driving.Eight fixed bandage to ensure the safety of the box and the internal items.Works on all car with or without racks.Package Included:1 x Rooftop Cargo bagNote:-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.-Please allow 1-3CM differs due to manual measurement.-Due to the different display and different light, the picture may not reflect the actual color of t
This residual pressure holding valve is suitable for the front air suspension strut of VW Phaeton. Residual pressure retaining valves of the original air suspension struts usually become defective after a while which leads to a problem with the strut and it cannot be steered up and down anymore. With this valve you have the possibility to repair your strut at a reasonable cost. The delivery also includes an O-Ring and an airline fitting.
