Floor Drain Faucet accessory Odorless Superior Quality Others Contemporary Stainless Steel Electroplated 100mm100mm Lightinthebox

Manguera de jardín con pistola rociadora para riego Manguera de agua expandible mágica para jardinería 175FT

R.S.T. gauging trowel with a carbon steel blade and soft-grip handle. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).

Listing Date:03/29/2023

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : Red Finish : Smooth Size : 400ml Coverage : 0.5m²/L

The Hitachi DN18DSL/L4 Angle Drill 18 Volt with a lightweight, compact design and a 10mm keyless single sleeve chuck. It is the class leader, with a low centre height of 23mm, for easier working in confined spaces. The variable speed paddle and battery life indicator mean more effective work time and less down time. The drill is fitted with a soft grip for improved comfort and control. There is also a handy white LED work light and a belt clip, which can be fitted on the left or right hand side. It has an all new design and is compatible with the full range of 18 Volt slide tools, accepts all Hitachi 18V Li-Ion slide batteries from 1.5Ah to 5.0Ah ( please note this machine is supplied BARE, WITHOUT a battery). Bare Unit, No Battery or Charger Supplied. Specification No Load Speed: 0-1,800/min.Max Torque: 12Nm.Capacity: Wood: 28mm, Steel: 10mm.Centre Height: 23mm.Head Height: 88mm.Overall Length: 326mm.Weight: 1.7kg.

Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 300mm (12 in).Teeth 13.5 tpi