Libre
Soutien
The Faithfull PDRAUG25 is an easy to use drum auger that is designed to remove blockages from household pipes and drains when plungers and chemicals fail to work. The auger utilises a 7.6m/25ft x 6mm/1/4in flexible spring steel shaft with a barrel end that can be rotated to clear away blockages and is easily retracted into its case after use for safe storage. The auger has a sturdy plastic body manufactured from PE and ABS wipe clean plastic and features both an integral winding and pistol grip handle that help make the auger easy to use. Once fully retracted the spring steel shaft can be locked in place using the locking thumb screw. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
TNI-U TU-6301E trinquete cortador tubo de PVC alta calidad tubería de plástico y tubería cortador Dual colores maneja herramienta cortante
Stahlwille Series 49 INHEX Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Overall length: 52mm.Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive. Size: 3mm.
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000
Type:Pull-out / Pull-down; Style:Antique; Finish:Brushed,Antique; Faucet Type:Kitchen faucet; Installation Type:Centerset; Valve Type:Ceramic Valve; Faucet Body Material:Brass; Handle Material:Zinc Alloy; Batteries Included:No; Installation Holes and Handles:Single Handle One Hole; Features:Pull out; Shipping Weight:1.905; Net Weight:0.000; Listing Date:11/11/2020; Special selected products:COD