4pcs T1 T2 Protección de las manos de seguridad Serrín Sierra de madera Empuje el conjunto de varillas para la mesa de carpintería Herramienta de carpintería

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/12 Steel Wrecking Bar 300mm (12in)

The Knipex 95 61 190 wire rope shears are ideal for medium hard wire cables up to 7mm diameter without splaying, including those that are extremely strong, such as for example tyre cord. They also have two crimping dies for end caps on Bowden cable sheaths and end ferrules for traction cables and the blades are hardened to approximately 64HRC for added strength and durability Cutting head on the 95 61 190 are forged with polished head and handles plastic coated for added grip and a comfortable grip. Specification Length: 190mm (7.1/2in).Cutting Capacities: Multi-Stranded Cable: 7.0mm, Wire Rope: 5.0mm, Medium Hard Wire: 4.0mm & Piano Wire: 2.5mm.This Knipex ;Wire Rope/Bowden Cable Cutter is fitted with PVC handles.

The Forge Padlock Bolts or Brenton Bolts are used to secure gates, or doors which require locking with a padlock. The Forge padlock bolt is designed for heavy-duty use with a strong steel bolt and locking collar. It comes in a variety of sizes and are either black powder coated or galvanised. Supplied with fixings for screwing into position and also bolt through fixings for additional security. Fitting Instructions: 1. Position Padlock bolt in the desired position and mark the square fixing holes with a pencil. 2. Drill holes using a Ø6mm drillbit and use the bolts provided to fasten in place. 3. Position the keep and ensure that the bolt moves freely through the hole.The FGEPBLTGAL6 Padlock Bolt has the following specifications: Bolt Length: 150mm.Finish: Galvanised.

These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200

Powerful and long-life DC motor with overheating and overload protection. Robust solid metal drill chuck with chucking force safety device. Short design of 180 mm. Perfect for use with stepped drill bit, e.g. for drilling initial holes in sheet metals.17 torque levels – force can be easily metered up to 30 Nm for tough screw connections. 2-speed solid metal gearbox. Bright LED light on housing. 2.5 Ah battery capacity for up to 350 screw connections (5 x 40 mm). FEIN SafetyCell technology. Protects the battery and tool from overload, overheating and total discharge. The battery charge can be read off the battery. Includes belt holder and magnetic bit holder. One charger for all FEIN Li-ion batteries of all voltage classes.

Type:Pull-out / Pull-down; Style:Antique; Finish:Antique Brass; Faucet Type:Kitchen faucet; Installation Type:Centerset; Valve Type:Ceramic Valve; Faucet Body Material:Brass; Handle Material:Zinc Alloy; Batteries Included:No; Installation Holes and Handles:Single Handle One Hole; Features:Pull out; Shipping Weight:2.000; Net Weight:1.0; Listing Date:11/11/2020; Special selected products:COD