Libre
Soutien
Für 30-Truss FQ/FT/GQ/GT/PQ/PT, Weiß Eine schnelle und einfache Möglichkeit, Ihr Trio- oder Quatro 30-Truss-System ohne Schäden oder Kratzer zu handhaben. Das Stapeln von Trägern war schon immer eine Herausforderung, aber der Truss-Carrier übernimmt das jetzt für Sie: Jetzt können Sie unsere FT, GT, PT, FQ, PQ und GQ Träger problemlos und ohne sie zu beschädigen lagern. Der Truss-Carrier besteht aus Rigidex HD521EA dichtem Polyäthylen und wiegt 450gr pro Einheit. Er ist für Umgebungen mit einem Temperaturbereich von -40 °C bis +120 °C geeignet, ohne zu verformen. So wird eine problemlose Handhabung in jeder Situation sichergestellt - sowohl Indoor als auch Outdoor.
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
Panel de Control de lámpara de LED RC AX-004 para 1/10 1/8 HSP RC Traxxas TAMIYA CC01 4WD Axial SCX10 modelo coche
ACHTUNG: Bei diesem Artikel handelt es sich um B-Ware bzw. Vorführware in Top-Zustand! Das gesamte Frequenzspektrum druckvoll über 30 m und darüber hinaus projizieren - das konnten bisher nur große Line-Arrays. LINEAR 5 LTS A bringt jetzt erstmals echte Long-Throw-Eigenschaften in ein ultrakompaktes Format. Für Sie als Anwender bedeutet das: Sie benötigen weniger Lautsprecherkomponenten und sparen wertvollen Truck-Space. Fliegen und Groundstacking werden deutlich vereinfacht und schneller. Damit ist das neue LINEAR 5 Long Throw-System LTS A nicht nur der einfachste, sondern auch der wirtschaftlichste Weg zum besten Sound-Ergebnis für Veranstaltungen bis etwa 3.000 Personen. Technische Daten Ultrakompaktes Long-Throw-System Niedriges Transportvolumen und kurze Aufbauzeiten Innovative Multicell Transformer Technologie (MCT) Vertikal asymmetrisches Abstrahlverhalten (+5°/- 25°) Akustisch korrektes Headstacking 1.000 Watt (650 W + 350 W, biamped) 138 dB Halfspace Made in Germany Max SPL 133 dB Halfspace (@10% THD) Max SPL peak 138 dB Halfspace (@10% THD) Max SPL calculated 141 dB Halfspace Frequenzgang +/- 3 dB 115 Hz - 14 kHz Frequenzgang -10 dB 100 Hz - 20 kHz Gesamtleistung 1000 Watt Verstärker Tief-Mittelton 650 Watt @ 4 Ohm Verstärker Hochton 350 Watt @ 4 Ohm Endstufen Class D - Biamped Aktive Schutzschaltungen Undervoltage-Protection, Thermo-Protection, Short-Circuit-Protection, Overcurrent-Protection, Subsonic 24 dB/Okt., Peak-Limiter, DSP-Input-Limiter Tief/Mitteltonlautsprecher 3x 8\" Neodymium Hochtontreiber 1\" Neodymium Horncharakteristik 60° x +5°/- 25° MCT-Horn Trennfrequenz aktiv 1,7 kHz FIR X-Over mit 48 dB/Okt. Anschlüsse 1x XLR/Klinke-Kombi In, 1x XLR Thru Eingangsempfindlichkeit +4dBu @ Gain Centerclick / L5 System Level Klangregelung EQ-Schalter Flat/Contour Hochständerflansch MonoTilt 0° Flugpunkte 7x M8 Griffe 2, integriert Gehäuse Birke-Multiplex Frontgitter 2 mm Metallgitter mit schwarzem Akustikschaumstoff Oberfläche Acryllack, schwarz Optionales Zubehör Transport-Schutzhülle, Neigebügel, Neigebügel-Extension Headstack, Clustering-Platte (Pick-Point), AP-8 Abmessungen (BxHxT) 44 x 68 x 46 cm Gewicht 24,9 kg / 54,9 lbs.
Das 15\"/1\" Fullrange Top ist als Stand-Alone-Box mit 1000 Watt Amp-Leistung aufgrund des hohen Wirkungsgrades die lauteste Referenz in ihrer Klasse. Wie die L5 112 FA ist sie mit asymmetrischem Horn für die optimale Abstrahlung ausgestattet und bietet damit vorne eine breite Abstrahlung, nach hinten wird der Schall stärker gerichtet und erzielt dadurch mehr Reichweite. Features Anwendung: Topteil, Stand Alone System, DJ-Monitoring 1000 Watt Class-D (650 W + 350 W, biamped) 15\'\' Speaker mit 3\'\' Schwingspule 1\'\' Treiber mit 1,75\'\' Schwingspule 139 dB Max SPL Peak @ 10% THD (halfspace) Asymmetrisches Horn (60°-90° x 55°), drehbar Road taugliche Hybrid Holzgehäuse 2 separate Inputs EQ Schalter (High Power / Small Venue) Technische Daten Modell L5 115 FA Max SPL calculated 139 dB half space Max SPL peak 139 dB half space Trennfrequenz aktiv 1,65 kHz, 24 dB/Oktave Max SPL 129 dB half space Gesamtleistung 1000 Watt Frequenzgang +/- 3 dB 57 Hz - 18 kHz Frequenzgang -10 dB 48 Hz - 20 kHz Empfindlichkeit HF, 1W/1m 110 dB full space / 116 dB half space Empfindlichkeit LF, 1W/1m 100 dB full space / 106 dB half space Verstärker Tief-Mittelton 650 Watt @ 4 Ohm Verstärker Hochton 350 Watt @ 4 Ohm Aktive Schutzschaltungen Undervoltage-Protection, Thermoprotection, Short-Circuit Protection, Overcurrent-Protection Eingangsempfindlichkeit +4dBu @ Gain Centerclick / L5 System Level Schutz Subsonic 24dB/Oktave, Peak Limiter Anschlüsse 2 x XLR- Kombibuchse IN, 2 x XLR-Thru, 1 x XLR-Mix Out Tief/ Mitteltonlautsprecher 15\" mit 3\" Schwingspule (4 Ohm) Hochtontreiber 1\" mit 1,75\" Schwingspule (16 Ohm) Horncharakteristik 60°- 90°(Asy) x 55° CD Horn, drehbar Klangregelung EQ Schalter Small Venue / High Power Subsonic Filter ja Peak limiter ja Endstufen Class D - Biamped Sensitivity - Schalter ja - Line/Mic Input A Hochständerflansch Duo Tilt 3/7 Flugpunkte 3 x M8 Griffe 2 integriert Optionales Zubehör Schutzhülle Gehäuse Hybrid (Birke Multiplex / MDF) Frontgitter 2mm Metallgitter mit schwarzem Akustikschaumstoff Oberfläche Acryllack, Schwarz Abmessungen (BxHxT) 44,9 x 70,8 x 45 cm Gewicht 30,7 kg / 67,7 lbs
Der Cameo CLSTROBE2 ist ein leistungsstarker LED Stroboskopeffekt mit sechs weißen 10 Watt COB LEDs und einem weiten Abstrahlwinkel von 80°. Er lässt sich per DMX steuern oder als Slave bzw. als Einzelgerät musikgesteuert sowie in den Modi Stroboskop und Dimmer betreiben. Die Stroboskop-Frequenz bietet intensive Effekte und ist auf 1 bis 20 Blitzen pro Sekunde variabel einstellbar. Die Tasten Mode, Value Up und Value Down sowie das gut ablesbare dreistellige LED-Display sorgen für eine einfache Bedienung der Menüs. Der kompakte und leichte CLSTROBE2 ist einfach zu transportieren und bietet dank des einstellbaren Montagebügels flexible Befestigungsoptionen. Technische Daten Produktart: Stroboskop Typ: LED Stroboskop Farbspektrum: Weiß Anzahl LEDs: 6 LED-Typ: 10 W COB, weiß Abstrahlwinkel: 80° Stroboskop-Frequenz: variabel, 1 - 20 Blitze/Sek. DMX-Eingang: XLR 3-polig DMX-Ausgang: XLR 3-polig DMX-Modus: 2-Kanal DMX-Funktionen: Flash Rate, Dimmer Standalone-Modi: Flash Rate, Dimmer, Sound Mode, Slave Bedienelemente: Mode, Value Up, Value Down Anzeigeelemente: 3-stelliges LED-Display Anschlüsse: Analoge Ein- und Ausgangsbuchsen, 6,3 mm Klinke Stromanschluss: Schuko Betriebsspannung: 100 - 240 V AC / 50 - 60 Hz Gehäusematerial: Metall Gehäusefarbe: schwarz Abmessungen ohne Montagebügel: 380 x 95 x 165 mm
