Nitro N2200 Analog, integral helmet

Double spoiler with incorporated air extractors: optimization of the aerodynamic trail and internal cooling. Autoseal system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold). SHARK skin peak side fastenings: passive reduction of aerodynamic noise. Micro-tech interior with antibacterial properties under the AEGIS label. Features
Constructed from carbon aramid fibre Integrated UV380 label & anti-scratch sun visor Double D-ring strap Visor can be fitted with a Pinlock Max Vision® film insert 2 shell sizes : optimal morphological adjustment Optimal comfort for the persons wearing glasses Quick release visor system Removable and washable cheek pads and lining (Use the delicates or cold cycle and place inside a washing net) Planned location for SHARKTOOTH® AEGIS-lining

Features: ABS shell and EPS lining sponge fabric. Protect your head from being hurt. Adjustable straps and quick release buckle. Suitable for skating, hip-hop, climbing and other extreme sports like bicycle use. Reasonable hole position, breathable and comfortable, convenient to wear. Wind tunnel design, effectively reduce wind resistance. It is resistant to fall, collision, non-breaking, high strength, high foam density and solid head protection.

The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals.Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle.Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless.49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.Ribbed body allows for better traction when unclippedChamfered edges for reduction in rock strikesExcellent mud-shedding: the design is very open.4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)

Features: Breathable and elastic lycra design, ensure comfort and flexibility. Index finger(right glove) with touch-screen design, easy to use your smart phones or tablet PC without taking off the gloves. Padded palms with shock-absorbing EVA material and gel silicone, increasing friction. Fastener tape straps on wrist to match your need better. Specially designed for sports lovers.

The SP120 SR6 range is a high performance protective motorcycle jean, tested to the incoming en17092 standard (currently in draft). Our SP120 SR6 range has achieved the AAA rating (120KPH) for abrasion resistance. The SP120 SR6 Vintage is a straight fit, fashionable jean in a raw denim. We have optimised the ride height of the waist to ensure the best coverage, comfort and fit in a riding position. Fashion is achieved through the cut of the straight leg. A wick away mesh liner is included, as well as hip and knee armour pockets designed to fit Covec’s range of impact protectors. Ideal for hot and cold climates, Covec’s SR6 liner keeps you cool in the summer and warm in the winter. As with all our products, Bull-it jeans have a shower-resistant finish60% Covec SR6 liner coverage. Features
Covec SP120 SR6 liner (AAA achieved for abrasion) 12.5oz denim Straight cut 4 leg length options, Short 30 inches, Regular 32 inches, Long 34 inches and Extra Long 36 inches Waist sizes from 30 inches to 44 inches Mid height waist line, suitable for all riding styles Straight cut with lower leg inside or outside of boot option Hip and knee armour pockets for optional armour Wick away mesh for comfort, working with the Covec rib this creates increased airflow keeping you cool in warm weather and warm in cold weather shower-resistant finish all over Traditional 5 Pocket denim design Flat Bull-it branded rivets for the front pockets and YKK zips

Topeak Dynawedge, Strap-On Seat PackMolded construction is light, water repellent and aerodynamic. Perfect for tubes, tools and other small items.