AGV X3000 Ago 1 Limited Edition, integral helmet

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Feature:Gold plated RCA connector.This lead simply converts the Fakra connector to RCA.Compatible with VW Ford Mercedes cars.Easy to install, Effective.Specification:Operating Voltage: 12VCable Length: 26cmOther part number: CT29VW03Package Included:1 X Fakra To RCA Aerial Adapter

Features
Full-grain oiled leather upper DRYTEX® waterproof and breathable liner Adventure dual density anti-slip welt sole Special rigid nylon mid-sole with steel shank External injection-molded plastic protection Shin and ankle TPU protection Adjustable straps with Velcro closure Unbreakable aluminum buckles Extra soft polymer padding with memory foam Anti-bacterial replaceable insole Optional stainless steel toe caps (included) Suitable for men and women 100% European production

* integrated reflective inserts with the Speed Demon * pockets for double chest protector (Pro-Armor only) * pocket for G1 and G2 back protector | Article: Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58 | Article: Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58, black-blue-yellow, Size 58

Equipment: Classic 5-pocket style without knee joint Customizable leg length Hip and knee protectors retrofit
Material: about 1.2 mm thick cowhide Lightweight lining
Upper: 100% leather
Lining: 100% polyester

These Forgefix cable ties are suitable for a range of different uses. The ties have a temperature range for continuous use from -40°C to 85°C. Application:These cable ties are suitable for many uses, including gardening, electrical installations, sign installation, point of sale applications and much, much more. They effectively bind and organise several cables or wires together. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter.Cable Tie Natural / Clear 4.8 x 200mm Box 100