Libre
Soutien
15 unids / set 6mm-50mm Diamond Coated Hole Saw Taladro Bit Cutter Core Shaft Tool Kit para cerámica de vidrio de porcelana de mármol 6/8/10/12/14/16/18/20/22/25/26/28/30/40 / 50 mm
The Sievert Cyclone Torch Kit fitted with a cyclone burner for rapid pipe soldering and brazing. Fits all standard propane cylinders and is suitable for plumbing and engineering applications. Contains the following: 1 x 3486 Handle.1 x 3524 Cyclone Burner.1 x Hose Failure Valve.1 x 4 Metres of LPG Hose.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.The Faithfull FAIHC2XSSB Stainless Steel Hose Clip comes in the following:Size: 2X.Adjustment: 45 - 60mm.
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200
The Henry Squire HLS50S High Security Lockset with an integral lock and pivoting hasp providing formidable resistance against attack and corrosion. It provides an integrated solution for securing vans, gates, doors, garages and other high risk areas. The lock body is made from solid hardened steel and the hasp is made of a special cast material. Hardened boron alloy steel shackle - fully protected. 6-pin tumbler mechanism giving over 250,000 key differs. Rekeyable. CEN Graded. Available keyed alike and master keyed. Available keyed alike and master keyed. CRIMESTOPPERS supported. Lock Body: 50.0mm.Lock Body Thickness: 26.0mm.Shackle Diameter: 10.0mm. Hasp Length: 150mm.Hasp Width: 68mm.Hasp Thickness: 16.0mm.
The Faithfull Heavy-Duty Hand Riveter has an easy 4-in-1 dial head for rivet sizes 2.4mm, 3.2mm, 4mm and 4.8mm. This handy feature means that no nozzle change is required. The riveter's handle is made of drop forged steel and its body is made from aluminium alloy with a steel insert. Its jaw is made from a high grade steel alloy. For easy loading and ejecting, the riveter has a return spring. 5 year guarantee.This Kit is supplied in a storage case with approximately 100 assorted rivets.