Libre
Soutien
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
R.S.T. gauging trowel with a carbon steel blade and soft-grip handle. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).
The Faithfull Tubular steel foresters bowsaws give equally good cutting performance on dry timbers as well as green wood and are suitable for gardeners, builders, farmers and DIY etc.Sharp taper enables ease of access amongst branches and undergrowth.The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve. Blade length: 530mm (21 in).
This M12V2 Router includes a revolutionary fan design that increases cutting efficiency and a variable speed motor which allows the user to work at more control to work at different speeds. The depth adjustment mechanism has both metric and imperial scales for fast and accurate adjustments and the fine height adjuster means easy adjustment when used with a bench stand.The variable speed dials are situated on the side handles for convenience and the improved collet chuck ensures bits are held securely. The Hitachi M12V2 also features a dust extraction adaptor.
25FT-175FT Manguera de jardín Manguera de agua flexible mágica expansible Manguera de plástico Tubo con pistola rociadora para riego
The Metabo SSW 18 LTX Power Plus Cordless Impact Wrench has a 1/2 inch drive. This Compact Impact Driver is ideal for tough applications. The high torque abilities (220Nm) of this wrench make it suitable for tightening or removing the most stubborn of rusty nuts or bolts. This Driver also features the Variospeed (V) electronics and a special 3 speed change switch which comes in particularly useful when dealing with smaller fasteners. This tool also comes equipped with the standard Metabo multifunctional monitoring system to protect both the machine and the battery pack as well as the patented air cooled technology which enables faster charging and long service life of the machine. For convenience, this wrench also comes equipped with a robust support strap for securing the machine and an integrated worklight. Supplied with 2 x 4.0Ah Li-Ion batteries, a charger and a carry case. Specification Bit Holder: 1/2in Drive.No Load Speed: 0-900/0-1,650/0-2,300/min.Impacts Per Min: 0-1500/0-2700/0-3300/min.Max Torque: 100/140/210Nm.Weight: 1.6kg.