The BlueSpot Bungee Cordshave a heavy-duty elastic design provides constant tension and a firm hold. Offering quick, convenient load binding with non-marring high strength hooks to eliminate knots. 12mm (1/2in) diameter provides maximum holding power and is ideal for tarpaulins, cars, trucks, trailers, bikes and motorcycles.These BlueSpot Tools Bungee Cords have the following specification: Size: 60cm (24in).Quantity: 6 Piece.
The ForgeFix Dome Head Rivet has a steel-plated stem and Aluminium head which provides a neat appearance with a low profile. This rivet is the most versatile and commonly specified head style. The dome head has a diameter double that of the rivet body providing more than sufficient bearing surface to retain all but the extremely soft or brittle materials.The rivet assembly is inserted into a hole drilled through the parts to be joined together and can be finally fixed by use of a hand held or pneumatic rivet gun.
The ABUS 41 Series laminated steel padlocks are made up from individually plated laminated steel sections with the bottom most plate hardened. The laminates individually refined with the new 'Etrena' treatment process for optimum protection from corrosion offering up to 40 years weather protection. The rivets in the outer laminates are compressed to protect against the rivet heads being knocked off. Precision pin tumbler cylinder protected against drilling and leverage. Where to use it: Medium security requirementThe cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 44 mmOverall height: 60 mmOverall depth: 26 mm Shackle width: 18.5 mm I.D.Shackle height: 20 mmShackle Dia: 7 mm
Number of drilling modes: Three. Hammer drill, rotary drill, hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. The HR3210C features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration Forward/reverse rotationVariable speed triggerTorque limiter3 functionRotary onlyRotary hammerHammer onlyDouble insulated Blows per Minute: 1,650-3,300bpmNo Load Speed: 315-630rpmInput Wattage: 850wMax Bit Diameter: 32mmMax Core Diameter: 90mmImpact Energy: HR310C: 5.6 JoulesHR3210FCT: 6.4 JoulesWeight:HR310C: 5.2kgHR3210FCT: 5.4kg Chuck type: SDS plusVibration drilling : 2.5 m/sec²Vibration hammer drilling: 10 m/sec²Vibration chiselling: 7 m/sec²Vibration K factor: 1.5 m/sec² Supplied with: Side handle, depth stop, bit grease, carry case. HR3210 FCT also supplied with Quick Change Chuck.
Roughneck Gorilla Gripper is a safe and easy way to grip, lift and carry all types of sheet materials, doors and worktops. Made from aircraft quality aluminium with special rubber gripping pads. Significantly reduces stress and potential injuries to your back, shoulders, neck, hands and fingers. A must for those handling large cumbersome boards and doors on a daily basis. Soft-grip cushioned handle with 3 sizes available, up to 19mm, 10 to 28mm and 35 to 50 mm, to handle the majority of board and door thicknesses.This Roughneck ROU32620 will clamp easily to boards or doors from 35mm up to 50mm for ease of movement around rooms or work site.
Designed for fitting to Record vices when holding soft or plated workpieces with highly polished surfaces to provide a firm grip without fear of damage.Special fibre more durable than lead or copper. Supplied in pairs.Size. 100mm (4 in).
