Gaerne GX-1 Supermotard 2016, boots

Split the grid in the Wireform jacket. The chassis on this three-season jacket comes with slightly pre-curved arms, ideal for the sportbike riding position. Comfort molded neoprene collar, unique reinforced grid chassis, and a full D3O® (shoulders, elbows, and back) package speak to the Wireform’s riding pedigree. Reflective hits provide visibility in low-light conditions, while a removable insulated SatinCore™ liner extends your riding season deep into the fall.
Features
ICON® Sport Fit Material: DynaxTM Ballistic Nylon Chassis Waterproofing: LEVEL : 1 Protectors: D3O® Impact Protectors - Shoulders, Elbows, Back Liner: Insulated SatinCore™ Liner - Removable 3M® Reflective Accents Reflective Thermoplastic Chest Logo Integrated Flex Zones Neoprene Collar Accordian Flex Zones Pre-Curved Arms YKK® Zippers Interior Zipper Slash & Cargo Pockets Streamlined Sportcuff™ Thumb Loops

Outer shell:
breathable Lycra mesh panels (80% nylon, 20% elasthane)
Lining:
3D comfort foam (100% polyester)
Fit / Features:
DIN 1621-2 certified anatomically shaped, flexible back protection body-hugging waist belt with wide Velcro closure adjustable diagonal belts V-shaped design for excellent shoulder protection removable protector washable detachable shoulder strap
Protection:
SAS-TEC® 3D protection

Helmet Technology
Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 40 36 32 28 24 20

Comfort Liner Thickness (mm) 12 10 8 10 8 6

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

The Essential ist ein Handschuh, der das Beste aus beiden Welten bietet: Ideal für den täglichen Gebrauch und lange Reisen.Handfläche: 100% Ziegenleder Externe Schutzoberteil für Mittelhandknochen. Multiple Verstärkungen mit doppelter Schicht und zusätzliche Schaum auf Bereiche gemacht, um Abrieb in einer Crash-Situation ausgesetzt (Palm, Seite der Hand, Finger) Ringfinger und kleinen Finger werden zusammen mit einem Lederstück gehalten. Halb Textil-, Halbziegenleder und vorgeformte der Must bietet ein hohes Maß an Komfort. Comfort Verstärkung an der Spitze der Handfläche und Daumen in den Einsteller auf dem Handgelenk und onthe Manschette. Zwischen jedem Finger, an der Unterseite, ist platzieren eine bestimmte Textileinlage, um überlegene Stufe des Komfort Minibar und ein S. Finger Steppnähte an der Außenseite positioniert, für besseren Komfort.

Collar and reverTwo jetted pockets55% polyester/45% woolDry clean onlySizes 36 - 50ins