Zandona Shark Armour GT Rückenprotektor / Brustprotektor Schwarz XS

The SCOTT 550 Stripes Helmet comes with a new design and is a high end helmet that pushes the limits of ventilation and safety. Equipped with the latest safety technologies such as MIPS® and Conehead and the perfect cooling management with strategically placed vents you will feel good and safe throughout your entire ride. Materials
In-Mold Technology
Features
Optimized & customisable ventilation 3D shaped foam Removable and washable liner & cheek pads
CONEHEAD™ CONEHEAD™ is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface. How Conehead TechnologyTM works ? There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head. The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head. Mips If you are seeking the best protection that money can buy then look no further. Scott helmets with integrated MIPS® brain protection system offer a whole new dimension in safety. No matter where or how you ride, choose a SCOTT helmet and Elevate Your Safety! Testing and results : taking a fall with a SCOTT MIPS® equipped helmet is very different.

A traditional helmet A helmet equipped with MIPS

Helmets are designed and optimized for straight impacts. They do not consider angled impacts. In an angled impact rotational violence is transferred to the head and the brain. MIPS is a low friction layer inside the helmet which allows the head to rotate relative to the helmet in an angled impact. This substantially reduces rotational violence and the potential for damage to the brain.

Rotational violence with a traditional helmet Rotational violence using a helmet with MIPS

How People Fall? Conventional helmets are tested by dropping them vertically onto a solid surface. They are designed to protect you from straight / radial impacts. For over 15 years, MIPS has researched how people crash in the real world. Collaborating with some of the world s leading neurosurgeons and experts, MIPS® has established that when you fall, your head most often hits the ground at an angle, creating a rotational shock to the brain. This rotational shock can cause strain in your brain. A helmet with MIPS® absorbs much of that rotational energy, offering you better protection. And if, against all the odds, you do fall vertically onto your head, a SCOTT helmet with MIPS® will protect you just as well as an ordinary helmet. MIPS imitated the brain s own protection system he Brain is suspended in a low friction cerebrospinal fluid which allows your brain to slide within your skull to protect the brain under impact. MIPS® Brain Protection System is a unique technology intended to protect your brain against angled impacts by imitating the brains natural low friction, barrier, thereby reducing the shock transmitted to your brain. Under angled impact the helmet slides on the MIPS® low friction layer minimizing the rotational violence transfered to the brain.

Material:
Fiberglass
Features:
contain anti-scratch visor included antiturbulenter double neck protection Micrometric helmet lock high-quality multi-layer coating with UV protection quality interior Sanitized® treated Glasses loop back ECE 22 05 Weight: 900g + /-50g

* integrated reflective inserts with the Speed Demon * pockets for double chest protector (Pro-Armor only) * pocket for G1 and G2 back protector | Article: Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58 | Article: Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58, black-blue-yellow, Size 58

Outer garment
Fibretech 600D : soft & resistant
Membrane
Waterproof & breathable membrane
Isolation
Full removable thermal lining 120g Fixed lining laminated to the membrane
Protection
Adjustable approved elbow protectors Approved shoulder protectors Pocket for approved back protector
Comfort
Body fit Front & back ADS ventilation system Comfort neprene collar Adjustable waist Zip cuff fastening Reflective material Strap for conneting with trousers

'Esatech Back Pro' Rücken-Protektor wurde untersucht, um die hintere Zone vor Kollisionen zu schützen, und bietet eine gute Lordosenstütze. StrukturDie externe Platte ist eine sechseckige Nitril Anti-Schock-Struktur, speziell auf hohe Schlagenergien mit seiner ganzen Oberfläche absorbieren.Die Innenpolsterung erfolgt durch E.V.C. (Stadtportal viskoelastische Zellen), innovative wasserdichte Anti-Schock-Material mit hoher Leistung/Gewicht/Dicke, komplett perforiert, um Schweiß von der Kontaktfläche nach außen zu erhöhen.Die Taille schließen haben eine doppelte elastische Regelsystem, hervorragend gegen Rücken-Schmerzen und komfortabel.Die Rücken-Protektor folgt und Mass es die natürliche Bewegung der Wirbelsäule bietet einen hervorragenden Schutz. Technologien ESATECH SYSTEM (ETS): Es ist eine sechseckige Nitril-Anti-Shock-System. Seine materielle Formel wurde entwickelt, um große Absorption vor allem zu hohe Schlagenergie, auf einem bestimmten niedrigeren Niveau zu reduzieren, während die Wabenform verflüchtigt sich die Aufprallenergie über die ganze Protector-Oberfläche ausführen. Esatech System ist eine ultimative Tech-Nologic äußere Hülle, die einen überlegenen Schutz während Sie elastisch, leicht und Durchführung der erneuern-MEMORY-Technologie bietet. RENEW-MEMORY-Technologie (RNW): Es ist eine integrierte Technologie, die das Material langsam in seine ursprüngliche Form und Größe nach jede Kompression zurückkehrt. Diese Techno-logie ermöglicht mehrere Auswirkungen über die gleiche Oberfläche, ohne Verlust der Schutzleistung durchführen. KALIBRIERT MEHRSCHICHTIGEN dichten (CMD): die Beschützer erfolgt durch Schichten mit unterschiedlicher Zusammensetzung und Dichte, so kalibriert, dass mit einer minimierten Last- und Profi le durchführen. Schiebe-Layer-Technologie (SLT): Es ist eine fi Xing Layer Technologie, die die Schichten in Position hält, wobei ein bisschen dazwischen schieben. Diese Technologie maximiert die Weichheit und den Komfort des gesamten Systems. Lüftung & Schweiß entfernen Textil (SRT): die Beschützer ist komplett perforiert, um die Luftzirkulation zu maximieren. Die Kontaktschicht erfolgt durch S.R.T. (Schweiß entfernen Textil) ist ein sehr transpirierenden 3D Textil, die den Schweiß nach außen überträgt. Technische Spezifi kationen: CE genehmigt EN1621-2, Lev.2; Konstruktion und Herstellung: MADE IN ITALY.Taille-Größe (cm): XS (70 TO77) - S (78 TO85) M(86 TO93) - L (94 TO101) XL (102 TO114)

Be ahead of your time. This range provides optimal safety and comfort for very long distance biking. In this case, SHARK Helmets’ Research and Innovation Division has delivered a truly practical and modular range. Features
Enhanced kinematic visor Optimized chin guard locking system for improved ergonomics and flexibility during use The patented «Auto-up / Auto-down» system allows automatically lifting the visor while raising or lowering the chin guard 2 shell sizes : optimal morphological adjustment Anti-scratch visor Micro lock buckle system Integrated chin cover Optimal comfort for the persons wearing glasses Quick release visor system Double homologation: full-face/jet Washable interior lining (use the delicates or cold cycle and place inside a washing net) Pinlock Max Vision® included Planned location for SHARKTOOTH® Integrated UV380 label & anti-scratch sun visor Constructed from injected thermoplastic resin Weight: 1 650g (size M+/- 50g) ECE R 22-05, DOT FMVSS-218, InMetro: INM/NBR 7471 : 2001