This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.The TENM1205106 1/2inch square drive socket has the following specifications:Size: 10mm.Length: 38mm.
Faithfull heavy-duty clamps manufactured from a high quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a Black Oxide coating with powder coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.
Replacement irons (blades) are available for all Stanley block and specialist planes.All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed.All cutters are fine rotary ground to give a flat surface that is easier to sharpen.G : Denotes suitable for old style planes.To fit 112060 Plane 60. 1/2G.(old style)Size of Cutter 1.3/8in
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact sockets have a 1/2 inch square drive. They are manufactured to the latest DIN standard for industrial use.The TEN920617 Impact Socket has the following specifications:Size: 17mm. Length: 78mm.
Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.
