Abus E60NP Nickle Pearl 10/45 Half Cylinder

IRWIN Record Mini Bender 210 (3, 4 & 6mm Copper) is designed for bending small diameter copper, stainless steel, aluminium and steel tubes.Particularly suitable for the hydraulic engineer, vehicle mechanic and tool maker.Capacity: 3, 4, and 6mm (1/8, 3/16, and 1/4in) O.D.

This hacking knife has a steel blade with twin leather scales riveted to the shaft. It can be struck with a hammer to remove old putty from window frames. Size: 4.1/2in.

Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: round bastard.Tanged.

The Blue Spot Fine Thread G Clamps have a fine thread with reinforced shoulders for strength. They have a malleable cast iron frame, a tommy bar handle and swivel shoe.Size: 102mm (4 inch).

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 300mm (12 in).Jaw Capacity: 34mmWeight: 645g.Spare Adjustable Jaw BAH8073C-2 - Available to orderSpare Knurl Set: BAH8073C-95 - Available to order