Swarfega Swarfega Janitol Flora Fresh 5 Litre

IRWIN Record replacement end cut jaws suitable for 924E/BC924E bolt cutters.

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm

The Britool BRIE121203B set of 6 ball ended T-handle hex keys are crafted in silicon steel and finished in black phosphate. The ergonomic T-handle allows effective use of either end of the wrench with the ball ended head allowing an angle up to 15° . 6 x Ball Ended Hex Keys: 4, 5, 6, 7, 8 and 10mm.

The Stahlwille Series 44 INHEX sockets have 1/4in square drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated. Manufactured to DIN 3124/ISO 2725-1 standards. Overall length: 55mm. MADE IN GERMANY.Stahlwille In-Hex Socket 1/4in Drive. Size: 7/64 AF.

The DEWALT FlexVolt XR Slide Li-Ion Batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased run time.It offers users increased run time, over any of the 18 Volt XR 4.0Ah or 5.0Ah Li-Ion batteries.