Gratis
Apoyo
The Knipex 74 91 Series high leverage centre cutters with dipped PVC handles and centric precision cutting edges with an integrated forged joint axle for heavy-duty use. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Like most of the Knipex range, these cutters are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc. They are made from top quality high grade Chrome Vanadium tool steel with polished hardened heads. Specification Cutting Capacity: Piano: 3.5mm, Hard: 3.8mm, Medium: 5.0mm.Length: 250mm (10in).
Record Irwin V150B Woodcraft Vice is lighter in construction than the standard woodworking vices, this useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High quality cast body fitted with carefully aligned steel slide bars and main screw. Jaw Width. 150mm (6in).Jaw Opening: 115mm (4 1/2in).
The tool has double insulation for increased user protection and a built-in dust collection system to keep wok areas free from debris and dust. Hook and loop type abrasive paper can be used. It is supplied with a front grip, dust bag and an abrasive disc.
It has an all metal keyed chuck for maximum durability and bit retention, for added convenience it also has an on-board chuck key holder. The POWERSTATE® brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,200/min.Chuck Size: 13mm.Capacity: Wood: Auger Bits: 38mm, Self-Feed Bits: 50mm.Length: 431.8mm.Weight: 3.3kg.
Forge aluminium value door handles. Sprung lever on backplate. Fixings included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a Bradawl.2. Drill Ø2mm Pilot holes and reposition the handle before securing using the wood screws provided.Designed to be used with a Euro cylinder mortice lock with centres of 57mm.
Pistola de tuercas de remache 10 "Herramienta de remachado de remachador ciego de una sola mano Herramienta de pistola de remache