Gratis
Apoyo
Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.
The Milwaukee M18 BRAID-0 Right Angle Impact Driver has a compact design and measures 307mm in length and a 53mm head design, making it ideal for working within confined spaces. The full metal gearbox and gears provide superior durability and maximum torque in even the toughest applications. There is a multi-handle design with an extended paddle switch for multiple grip positions and maximum comfort. The 1/4in Hex chuck provides quick and easy one handed bit change and there are 2 speed settings, that allow for a wider range of applications. REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability. Individual battery cell monitoring optimises tool run time and ensures long term pack durability. There is also a on board fuel gauge and LED light. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,500/0-2,250/min.Impact Rate: 0-2,400/0-3,400/bpm.Max Torque: 41/81Nm. Weight: 1.8kg.
The Wera BiTorsion Extra Hard (BTH) bits significantly extend service life. Ideal for use with screws into general construction materials and timbers. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life. Use with all combi and drill drivers. For impact tools, use Impaktor bits.Card of 2 Wera 855/1 BTH BiTorsion Pozidriv PZ2 Insert Bit Extra Hard 25mm
Palo telescópico plegable ultraligero portátil retráctil varilla plegable herramienta de protección de autodefensa al aire libre
The Marshalltown MPB Pre-Worn Plasterers Trowel has a pre-worn shape which eliminates line and ripple marks right from the start. High grade hardened and tempered spring steel blade with bevelled work edges which prevents surface aggregate popping and the correct blade shape, allows novice finishers to be able to produce a professional job. The curved DuraSoft® handle is held firmly by a nut and washer, the blade is made from stainless steel which is easier to clean. These trowels do not corrode and are therefore much longer lasting.Marshalltown MPB14SSD Pre-Worn Plasterers Trowel Size: 350 x 125mm (14 x 5in).
Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).
