Adam Hall Cables 3 Star Serie- 8/0-Kanal-Audio-Multicore auf Trommel, 15 m

Features: Suitable for most guitar effect pedals. Output: 9V DC output 1A, negative inside positive outside. Input: universal voltage 100V~240V, 50/60Hz. 5 way daisy chain cable allows it supplying power for 5 pedals simultaneously. Professional performance give the chain great noise isolation.

The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak. The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton? former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight. Technische Daten Extended Bandwidth (300 - 22000 Hz) Neodymium Magnet Assembly With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion Excellent Phase Coherence Perfect Time Alignment without Problems of Multi-Source Interference Ultra light Weight  

Features: Aluminum alloy housing design, low noise and stabilized voltage supply. A lightweight power supply with 1 input jack and 10 output jack. Powers eight 9V guitar effects, one 12V guitar effectsand one 18V guitar effects all at once without losing any signal intensity. Blue LED for power lights in normal using mode. When output jack has short-circuiting situation, thecorrespondingLED light go outautomatically.It goes in self-protection mode and it will auto-restart in about several seconds once you unplug the guitar effects. Foldback current limiting circuit provides ultimate protection against power shortages and overloads. The maximum current of No.1 to No.7 output jacks is 100mA for powering normal guitar effects. The maximum current of No.8output jack is 500mA for powering digital guitar effects and low power digital guitar amplifier. Adaptor of 100V-240V input and 18V output. Enjoy the quiet and cool operation of a fully regulated power supply. Connections: 1)Plug the included adaptor into 18V in jack. 2)Connect the adaptor to 100-240V power, the blue LED will light, if you use other adaptors, make sure the output is 18V rated at 1000mA and the plug is positive barrel and negative center type. 3)Connect your 9V guitar effects to the eight 9V outlets with included DC cables. 4)Connect your 12V guitar effects to the 12V outlet with included DC cables. 5)Connect your 18V guitar effects to the 18V outlet with included DC cables.

IRIN verstellbarer Gürtel gewebte Baumwolle Gitarrengurt mit Leder für Elektro akustische Folk Gitarren endet komfortabel und langlebig

Features: Suitable for alto saxophone. Strength 2.5, durable and not easy to deform. High quality ABS reeds, with careful polishing grinding, looks more elegant and exquisite. Good sound quality for your saxophone, comfortable using feeling.

Mit konstant 250 mA pro Ausgang ist das kompakte Netzteil PWT 05 MK2 von Palmer für praktisch alle Pedalboards geeignet. Zur sauberen Spannungsversorgung Ihrer Effektpedale sind die fünf Hohlsteckerbuchsen mit negativem Innenkontakt voneinander isoliert, damit keine Erdschleifen und das damit verbundene Brummen entstehen. Das PWT 05 MK2 ist gegen Überlast geschützt und wird mit 25 und 50 cm langen Anschlusskabeln sowie einem Y-Kabel geliefert, das zwei 9V-Ausgänge für massive 500 mA Spannung verbindet. Ebenfalls im Lieferumfang ist ein Verteiler zum gleichzeitigen Anschluss von fünf Pedalen an einen Ausgang, sofern deren gesamter Spannungsverbrauch 250 mA nicht überschreitet. Das extrem stabile Gehäuse des Palmer PWT 05 MK2 ist mit Möglichkeiten zur festen Montage, Zugentlastung der Kabel, einer IEC-Netzbuchse und Spannungswähler ausgestattet und weltweit einsetzbar. Technische Daten Produktart: Netzteil Typ: Mehrfach-Netzteil Netzanschluss: IEC-Kaltgerätekabel Eingangsspannung: 230 V ~ 50 Hz, 115 V ~ 60 Hz Ausgänge: 5 Ausgangsanschlüsse: 2,1 x 5,5 mm Ausgangsspannung: 9 V Max. Ausgangsstrom: 250 mA je Ausgang Isolierte Ausgänge: Ja Polarität: innenliegender Minuspol Kabellänge: 25 - 50 cm Anzeigen: Power, Overload Bedienelemente: Spannungswahlschalter, Netzschalter Abmessungen [B x T x H]: 105 x 140 x 45 mm