ForgeFix FORPB840M M8 x 40 Masonry Anchor Projection Bolt Bag 10

Irwin Aviation Snips have precision-formed blades that are cold formed meaning that the blades are stronger for an extended cutting life, require less cutting force, and provide a longer cut per stroke. The optimised torsion spring gives a consistent and smooth operation with increased reliability and durability. The safety latch is comfortable to reach from handle position with an easy push-up and release and one-handed opening and closing. The lower blade is serrated, providing more grip and a smoother, consistent cut with no double marked edges. The high-strength alloy steel spines can sustain greater pressure for cutting tougher materials and give increased life. The compound cutting action, reduces force needed to cut and decreases hand fatigue. The solid over-moulded soft-grips give superior comfort and performance.These Irwin Aviation Snips have the following specification: Cutting Type: Left.Length: 250mm (10in).Cutting Capacity: Sheet Metal: 1.19mm.

The Arctic Crack-It Shock Freeze Release Spray releases seized and corroded parts through shock freezing. The freeze action breaks the corrosion seal and allows the penetrant to reach the corroded area, releasing the seized items in 1-2 minutes. Also helps to prevent future corrosion and is completely bio-degradable. Lowest Operational Temperature: -45°C.

Number of drilling modes: Three. Hammer drill, rotary drill, hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. The HR3210C features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration Forward/reverse rotationVariable speed triggerTorque limiter3 functionRotary onlyRotary hammerHammer onlyDouble insulated Blows per Minute: 1,650-3,300bpmNo Load Speed: 315-630rpmInput Wattage: 850wMax Bit Diameter: 32mmMax Core Diameter: 90mmImpact Energy: HR310C: 5.6 JoulesHR3210FCT: 6.4 JoulesWeight:HR310C: 5.2kgHR3210FCT: 5.4kg Chuck type: SDS plusVibration drilling : 2.5 m/sec²Vibration hammer drilling: 10 m/sec²Vibration chiselling: 7 m/sec²Vibration K factor: 1.5 m/sec² Supplied with: Side handle, depth stop, bit grease, carry case. HR3210 FCT also supplied with Quick Change Chuck.

A slimline design and soft-grip surfaces make for a comfortable, in hand fit. It also has an automatic spindle lock, which makes it easy to change tools, a 10mm quick-change drill chuck and an LED light to illuminate the work area.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : White Finish : Smooth Size : 400ml Coverage : 0.5m²/L

The Master Lock Excell™ Titanium Reinforced Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel. This stainless steel padlock with titanium reinforced body is a durable and solid padlock with the added security of a shrouded shackle that makes it very tough against pry/pull attacks. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains. Specification Shackle Diameter: 8mm.Internal Shackle Diameter: 22 x 24mm.Cylinder: 4-pin tumbler.